Accesory lighting question
JK Junkie
Joined: Nov 2013
Posts: 3,703
Likes: 8
From: The Dirty South
I double checked the fog light bulb and it is 24w. I don't know what I was thinking of, the headlights maybe. And I will definitely get the appropriate fuses for each set of lights. Thanks again for all the info! I really appreciate it.
Also the spare is all wired to the switch. Just the load end is open. I wired it just to verify the LED worked when switched on. It shouldn't hurt anything, I hope. The connecters are insulated so the metal is all covered by plastic.
Thanks Sport!
Also the spare is all wired to the switch. Just the load end is open. I wired it just to verify the LED worked when switched on. It shouldn't hurt anything, I hope. The connecters are insulated so the metal is all covered by plastic.
Thanks Sport!
Thread Starter
JK Enthusiast
Joined: Jun 2013
Posts: 144
Likes: 0
From: Western New York
And let's just say I was a tad bit nervous on this DIY project and tested the whole box on my 4wheeler battery before it ever touched the Jeep
JK Junkie
Joined: Nov 2013
Posts: 3,703
Likes: 8
From: The Dirty South
That was a good plan. But I see so many posts of guys that have no clue what they are doing that it is really refreshing to see someone who knows how important it is to get it right. 
If your Yankee ass ever makes it to the west coast of Florida, I'll buy you a beer..
If your Yankee ass ever makes it to the west coast of Florida, I'll buy you a beer..
Thread Starter
JK Enthusiast
Joined: Jun 2013
Posts: 144
Likes: 0
From: Western New York
Haha if this cold shit never goes away I may just take you up on that!