Notices
JK Electrical, Lighting & Sound Systems Bulletin board forum regarding topics such as stereo head units, CD players, MP3 players, speaker systems, amplifiers, hardmounted GPS devices, computers, headlight upgrades, fog lights, off-road lights, general wiring and anti-theft devices.

Antenna Mounts

Thread Tools
 
Old Jun 26, 2007 | 06:31 AM
  #11  
HG07JKRubi's Avatar
JK Junkie
 
Joined: Oct 2006
Posts: 2,466
Likes: 0
From: Pottstown, PA
Default

Originally Posted by W3CSX
Just curious what you all have done about mounting antennas. I'm working on mounting my ham radio and cb. I was thinking about fabing a bracket bolted to the spare tire carrier for one. There are a couple other ideas in my head. Just looking for a better mouse trap. Any ideas?

Jason
Avaliable soon through Quadratec ... stainless steel and mounts to the existing bolts for the spare tire carrier. They make one for the right side too.


Last edited by HG07JKRubi; Jun 26, 2007 at 06:33 AM.
Reply
Old Jun 26, 2007 | 08:52 AM
  #12  
JackMac4's Avatar
JK Jedi
 
Joined: Feb 2007
Posts: 7,568
Likes: 3
From: Denver, CO
Default

Originally Posted by HG97TJ
Avaliable soon through Quadratec ... stainless steel and mounts to the existing bolts for the spare tire carrier. They make one for the right side too.

This is basically what the teraflex mount looks like, except its powder coated and the one I have is for the right side.
Reply
Old Jun 26, 2007 | 11:23 AM
  #13  
mclee's Avatar
JK Newbie
 
Joined: May 2007
Posts: 88
Likes: 0
From: Huntsvile, TX
Default

Originally Posted by W3CSX
Just curious what you all have done about mounting antennas. I'm working on mounting my ham radio and cb. I was thinking about fabing a bracket bolted to the spare tire carrier for one. There are a couple other ideas in my head. Just looking for a better mouse trap. Any ideas?

Jason
I bought two spare tire mounts from Arizona Rocky Road (http://www.arizonarockyroad.com/antennamounts.html) for CB and 2M/440 antennas on my 4 door Rubicon. I routed a ground strap from inside the JK to a hinge bolt on the outside of the tailgate via the snap-on hole for the lower tailgate hinge cover. There are photos on one of my previous posts. I am hitting repeaters that I could not touch with the same antenna mounted on the left exterior beside the engine compartment on my old TJ.
Reply
Old Jun 26, 2007 | 11:26 AM
  #14  
mclee's Avatar
JK Newbie
 
Joined: May 2007
Posts: 88
Likes: 0
From: Huntsvile, TX
Default

Originally Posted by ky8t
I bought two spare tire mounts from Arizona Rocky Road (http://www.arizonarockyroad.com/antennamounts.html) for CB and 2M/440 antennas on my 4 door Rubicon. I routed a ground strap from inside the JK to a hinge bolt on the outside of the tailgate via the snap-on hole for the lower tailgate hinge cover. There are photos on one of my previous posts. I am hitting repeaters that I could not touch with the same antenna mounted on the left exterior beside the engine compartment on my old TJ.
Here is the post on the tailgate ground strap.

https://www.jk-forum.com/forums/jk-electrical-lighting-sound-systems-13/ground-strap-tailgate-mounted-antenna-8823/
Reply




All times are GMT -8. The time now is 11:02 PM.