Brake light 12v and Cooltech Harness 12v
#1
JK Newbie
Thread Starter
Join Date: Aug 2009
Location: Gig Harbor,WA
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Brake light 12v and Cooltech Harness 12v
I have just purchased a Cooltech Brake light harness to use while pulling my 09 Rubi behind the motorhome. I also want to use the Roadmaster Even Brake system for extra stopping power (The law in Washington State). i'm wondering if I'll have problems with the brake light system when it recieves 12 volts from both the Cooltech (motorhome) harness and the Jeeps 12 volts coming from the brake light switch that will be operated when the Even Brake applies the brakes?
That's two separate 12 volt sources landing at the brake light... any big deal???
That's two separate 12 volt sources landing at the brake light... any big deal???
#2
JK Enthusiast
Join Date: Dec 2008
Location: Camp Humphreys Korea
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
I don't think it would be any big deal. If it was a 24v source on the RV I'd say no way, but the 12v coming from the rv to the Jeeps lights shouldn't hurt anything.