here is something i did to day and though i would share it.

I already had my control box under the hood,so i drilled out the pop rivets, ran new wires in to the cab and mounted my plug in for my controler. I wish i would of taken more pictures as i did this, but i always forget.
just over look all the dirt and mud.

 

That really looks nice and clean. Good job.

-meljr

 

i thought about doing switchs but i wanted to be able to use inside or outside with as much ease as possible.this way i can still control it while standing next to the winch if need be.

 

Really good job!

 

pretty cool, good installation.

 

Nice idea. I went a similar route, only I went with a wireless remote and mounted the receiving unit in the console.

 

Nice job looks real good.

 

I like that idea.....nice work !!

 

Looks good, what guage wire did you use and about how long was it. Have you used it yet? Looks like a great idea.

 

I went with 14 Guage wire and when all said and done they ended up being about 7 feet long. I have used it already and i can still reach my remote to my front bumper . makes it nice to not have to get out, you can make your spotter hook everything up.