Custom OEM Buttons
#1
JK Enthusiast
Thread Starter
Join Date: Jul 2008
Location: Alberta
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
Custom OEM Buttons
I know that some people here have some custom work done, or even do it themselves. I'm wondering if anybody could help me out with this one. I'm very peculiar about certain things. I'm looking for somebody who can make custom labeled buttons to replace the blank cover on the MOPAR Switch Pod - for example, the one between the Hazard Lights and ESP buttons shown below. What I need (or should I say, want) is a button labeled "AUX". Yes, I know I could just install a rocker switch somewhere. Like I said, I'm very picky.
Anybody?
Anybody?
#3
JK Enthusiast
Thread Starter
Join Date: Jul 2008
Location: Alberta
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the quick response, but it's not what I'm looking for. Some vehicles come with the Airbag Sensor Display in that location, while others don't. In all honesty, I don't know if mine has it but being a North American vehicle, I assume it does. Regardless, I am looking for a custom labeled button to install in that pod, whether it's in that location or not.
Last edited by awndray; 09-05-2008 at 01:53 PM.
#4
JK Jedi Master
Join Date: Oct 2006
Location: O HI 4 Lo
Posts: 15,133
Likes: 0
Received 0 Likes
on
0 Posts
them have a circuit board behind the buttons, so i'm not sure you could make it a function.
I believe the 07's had the seatbelt light and 08's switched to the gauge cluster.
I believe the 07's had the seatbelt light and 08's switched to the gauge cluster.
#5
JK Super Freak
Join Date: Oct 2007
Location: The Badlands (near Lafayette, IN)
Posts: 1,595
Likes: 0
Received 0 Likes
on
0 Posts
Yes, there is a circuit board, but there is space between the board and the button face. I put the rocker switch for my Daylighters in the far left position.
I don't know how much room between the LED for the airbag light and the button face, though.
I don't know how much room between the LED for the airbag light and the button face, though.
Last edited by sixt7gt350; 09-05-2008 at 04:58 PM. Reason: added pic of my switches
#6
JK Enthusiast
Join Date: Feb 2008
Location: Phoenix, AZ
Posts: 447
Likes: 0
Received 0 Likes
on
0 Posts
it would require a lot of custom work, and i dont think it would be possible to do exactly what you want. the blank covers are just that, covers. it would be hard to turn one of them into a button. i think the closest thing you could do it setup your buttons like me and sixt7gt350 have.
#7
JK Super Freak
there are several chrysler vehicles that use the same switch panels.. the PT cruiser and I believe charger come to mind so that you may find that MOPAR makes a switch labelled with what you want that would be a direct match for your switch panel....
-Christopher
-Christopher
Trending Topics
#8
Buy new MOPAR switches at Quadratec for 40$ http://www.quadratec.com/products/52446_110.htm
Replace the 2 wires of the Sway Bar or Axle Lock...
Replace the 2 wires of the Sway Bar or Axle Lock...
#9
JK Enthusiast
Join Date: Nov 2007
Location: Calgary, Alberta
Posts: 384
Likes: 0
Received 0 Likes
on
0 Posts
Buy new MOPAR switches at Quadratec for 40$ http://www.quadratec.com/products/52446_110.htm
Replace the 2 wires of the Sway Bar or Axle Lock...
Replace the 2 wires of the Sway Bar or Axle Lock...
That's what I intended on doing. After waiting 3.5 months with the thing still on backorder I cancelled the order!!
Hate to say it, nab one from a dealer, at least they can get their hands on one.