I did the same with blue. I keep them on almost all the time. The girls dig the pretty blue lights haha
http://i15.photobucket.com/albums/a3...p/DSC04745.jpg
Did the back too. I mounted them on the underside of the seat and grounded them to the frame inside the seat that latches to the jeep so when I take my backseat out I just disconnect one wire and take it out. :bleh:
http://i15.photobucket.com/albums/a3...p/DSC04746.jpg

Just be careful and make sure you guys don't install black lights by accident, it might be hard explaining all the spots on the carpet....:blush:

Ouch
:thumbsup:

[QUOTE=backwoodjk;792949]Just be careful and make sure you guys don't install black lights by accident, it might be hard explaining all the spots on the carpet....:blush:[/QUOTE

lmao :rotflmao2:

number of LEDs
 

silly question but how many LEDs are you guys putting in the footwells? is it personal preference? i don't want them on all the time, just when the door opens. i might go with white or red(to match jk).
thanx!

The strips I got from advance auto parts come with 12 leds in them and mine are switched so you can turn them off

I plan on putting some blue ones in. I bought some single LED's to put under the lip on the dash. I bought a few extra to use in the footwells, but I don't know how many I should use. Maybe I will get a strip. How many did you on this setup???

I used one strip in each footwell and 2 in the back. Each strip has 12 leds in them.

Now what about if I wanted to do this off of a switch? Anyone know if it can be done by that easily? What would it take???

Also installed RED NEON in the front and back footwell...:D