Nakamichi 3510-m7 install with PAC
08-08-2022, 05:32 AM
#1
JK Newbie
Thread Starter
Join Date: Aug 2022
Location: Coquitlam, B.C, Canada
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Nakamichi 3510-m7 install with PAC
Hello everyone,
First time here and had my 2018 Wrangler Unlimited Sahara for a couple weeks and LOVE IT!
Got rid of the 430n stereo, and installed a double din Nakamichi 3510-M7 head unit. I also installed the PAC controller to keep the SWC controls. The issue I am having is as follows.
None of the SWC will learn into the head unit. I can tell it is reading the controls as it will seem to program one button, but nothing after that. I have tried resetting the PAC controller to factory, still nothing. I then reset the PAC again and chose the correct number on the PAC dial to manually program the SWC and still nothing. Has anyone experienced this before at all and could pass along some tips, or should I book some time with a professional install guy?
Thanks everyone!
First time here and had my 2018 Wrangler Unlimited Sahara for a couple weeks and LOVE IT!
Got rid of the 430n stereo, and installed a double din Nakamichi 3510-M7 head unit. I also installed the PAC controller to keep the SWC controls. The issue I am having is as follows.
None of the SWC will learn into the head unit. I can tell it is reading the controls as it will seem to program one button, but nothing after that. I have tried resetting the PAC controller to factory, still nothing. I then reset the PAC again and chose the correct number on the PAC dial to manually program the SWC and still nothing. Has anyone experienced this before at all and could pass along some tips, or should I book some time with a professional install guy?
Thanks everyone!
