Radio issues
Thread Starter
JK Newbie
Joined: Jul 2016
Posts: 1
Likes: 0
From: El Paso
Radio issues
Purchased a stock uconnev Radio about a year ago from a guy. Well I had to disconnect my battery and now none of the radio buttons are responding. Carmax did some research and said the unit can from a 2010 wrangler and since the anti theft system has been activated it has to be plugged back into a 2010 jeep to reboot itself. Anyone know anything about this?
JK Enthusiast
Joined: Dec 2012
Posts: 235
Likes: 2
From: Carmel Mtn Ranch
Purchased a stock uconnev Radio about a year ago from a guy. Well I had to disconnect my battery and now none of the radio buttons are responding. Carmax did some research and said the unit can from a 2010 wrangler and since the anti theft system has been activated it has to be plugged back into a 2010 jeep to reboot itself. Anyone know anything about this?
The radio is probably looking for the VIN from the 2010 JK along with a code.
Last edited by CharlesS; Jul 27, 2016 at 11:46 AM.
JK Enthusiast
Joined: May 2015
Posts: 157
Likes: 0
From: Pompton Lakes, NJ
My 2011 JK has a 730N RER from a 2010 and I haven't had that problem when I disconnect the battery or pull the M12 radio fuse. When I installed the 730N; I had to push a couple buttons in combination to activate it. The 430N however needs to be accessed with a dealership console to activate. Is this radio a factory 430N?
The radio is probably looking for the VIN from the 2010 JK along with a code.
The radio is probably looking for the VIN from the 2010 JK along with a code.