Hello all,

So I did a thing and sank my Jeep. Water was over the top of the dash, yeah I know not my best moment in life, anyway now I'm in the process of repairing it. It's a 2008 Wrangler 2 door Rubicon. I've got an Autel IM608 and I'm trying to program the keys. I have completed the WCM replacement procedure and that seems to have gone well. VIN is programmed correctly to both the PCM and WCM. I can't seem to get the key learning process to complete. I have two codes B1A25(to be expected I haven't been able to program a key) and B1A29. My old WCM module was still readable so I was able to scan it. I noticed some discrepancies between my old module(05026071AP) and the new module(68209837AA). When I scan the old module it says SKREEM is in "Normal mode" and with the new module is claims it is "Not Applicable". With the new module the red dot on the dash stays on, with the old module it flashes. I'm pretty lost at this point hoping someone has some pointers.