BEAST - Building a 6.1 Hemi Powered JKU on 43's
Thread Starter
JK Junkie
Joined: Nov 2010
Posts: 2,942
Likes: 0
From: Valencia, CA
The diff covers came with the shave kits for the 14-bolt and 60 - they are made by Ballistic Fabrication. I don't know if they make them for JK's, but you could check their website.
Thread Starter
JK Junkie
Joined: Nov 2010
Posts: 2,942
Likes: 0
From: Valencia, CA
Thread Starter
JK Junkie
Joined: Nov 2010
Posts: 2,942
Likes: 0
From: Valencia, CA
I picked up some deals at the the PCI Radios and Rugged Radios booths at the Pomona Off Road show this weekend. My wallet was definitely a lot lighter at the end of the day!
Here's a photo of what we came home with:
Here's a photo of what we came home with:
JK Freak
Joined: Oct 2011
Posts: 531
Likes: 1
From: Lewisburg, PA
Originally Posted by CALIJK
The diff covers came with the shave kits for the 14-bolt and 60 - they are made by Ballistic Fabrication. I don't know if they make them for JK's, but you could check their website.
Thread Starter
JK Junkie
Joined: Nov 2010
Posts: 2,942
Likes: 0
From: Valencia, CA
JK Freak
Joined: Oct 2011
Posts: 531
Likes: 1
From: Lewisburg, PA
Originally Posted by CALIJK
Very cool - you don't see many JK's with this diff cover - definitely hardcore. Post up some pics when you get them.
Thread Starter
JK Junkie
Joined: Nov 2010
Posts: 2,942
Likes: 0
From: Valencia, CA
Here's the breakdown on the electronics we picked up at the Pomona Off Road Show on Sunday...
Intercom system:
Helmet Kits:
Race radio:
Lowrance 10" HD Gen2 unit:
Lowrance antenna:
This is where the Lowrance is going. Jim will be pulling out the airbag and installing it flush with the dash:
Intercom system:
Helmet Kits:
Race radio:
Lowrance 10" HD Gen2 unit:
Lowrance antenna:
This is where the Lowrance is going. Jim will be pulling out the airbag and installing it flush with the dash:
Last edited by CALIJK; Oct 9, 2012 at 05:25 PM.
