BEAST - Building a 6.1 Hemi Powered JKU on 43's
10-13-2012, 04:15 PM
#161
JK Enthusiast
Join Date: Jul 2012
Location: Ottawa, On
Posts: 457
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 10frank9
I'm pretty sure you'll be fine with no airbags. CVC requires functioning seatbelts in vehicles equipped with them at time of production (not to mention having the driver and passengers actually wear them). I'm not aware however, any statute that requires airbags as they are secondary restraints. Example is a vehicle involved in a collision with airbag deployment can still be operated so long as it is still a safe vehicle (minus the airbag). And IF you catch any flak it'll be from the CHP (Can't Handle Policework) hahaha okay that was just fun to say. In all reality as long as you are operating a safe vehicle for you and other motorists you should be fine.
I approved this message... Here are my credentials
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=377771"/>
I approved this message... Here are my credentials
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=377771"/>
10-13-2012, 06:50 PM
#162
JK Junkie
Thread Starter
Join Date: Nov 2010
Location: Valencia, CA
Posts: 2,942
Likes: 0
Received 0 Likes
on
0 Posts
I'm pretty sure you'll be fine with no airbags. CVC requires functioning seatbelts in vehicles equipped with them at time of production (not to mention having the driver and passengers actually wear them). I'm not aware however, any statute that requires airbags as they are secondary restraints. Example is a vehicle involved in a collision with airbag deployment can still be operated so long as it is still a safe vehicle (minus the airbag). And IF you catch any flak it'll be from the CHP (Can't Handle Policework) hahaha okay that was just fun to say. In all reality as long as you are operating a safe vehicle for you and other motorists you should be fine.
I approved this message... Here are my credentials
Attachment 377771
I approved this message... Here are my credentials
Attachment 377771
True, but I'd rather roll over rocks as big as a car...!
10-13-2012, 06:57 PM
#163
JK Junkie
Thread Starter
Join Date: Nov 2010
Location: Valencia, CA
Posts: 2,942
Likes: 0
Received 0 Likes
on
0 Posts
The tear down for Stage 3 continued today at the HigherGround Fab shop:
Jim and I also spent some time figuring out how much more trimming we need to do. The black line is the rough cut:
Jim making room for the big Lowrance:
Jim and I also spent some time figuring out how much more trimming we need to do. The black line is the rough cut:
Jim making room for the big Lowrance:
10-13-2012, 07:06 PM
#164
JK Junkie
Thread Starter
Join Date: Nov 2010
Location: Valencia, CA
Posts: 2,942
Likes: 0
Received 0 Likes
on
0 Posts
Again, the black line shows where we need to trim:
The dash is almost ready for the big Lowrance:
The rough trim line again:
What up Jim?:
Sway-A-Way did a custom 90 degree joint for the remote reservoirs:
The dash is almost ready for the big Lowrance:
The rough trim line again:
What up Jim?:
Sway-A-Way did a custom 90 degree joint for the remote reservoirs:
10-14-2012, 07:51 AM
#167
JK Junkie
Thread Starter
Join Date: Nov 2010
Location: Valencia, CA
Posts: 2,942
Likes: 0
Received 0 Likes
on
0 Posts
10-14-2012, 03:13 PM
#169
JK Jedi
Check out this Jeep in the PSC website. I love how they trimmed this grill, looks clean. Maybe it can give you guys an idea. 
Attachment 377996
Attachment 377996
10-14-2012, 03:24 PM
#170
JK Junkie
Thread Starter
Join Date: Nov 2010
Location: Valencia, CA
Posts: 2,942
Likes: 0
Received 0 Likes
on
0 Posts
Check out this Jeep in the PSC website. I love how they trimmed this grill, looks clean. Maybe it can give you guys an idea.
Attachment 377996
Attachment 377996
Frank; thanks, but I've not been following the Vengeance build. Can you post up a photo of the front grill?