35's with stock wheels post em' here
#1331
Super Moderator
You just burn through the center of the tread a little quicker, but no, you won't have any crazy issues. People do this all the time. 35's or 315's on stock wheels are just fine.
The following users liked this post:
dmwil (05-15-2020)
The following users liked this post:
dmwil (05-15-2020)
#1336
Question...
35/12.5/17
This tire requires a wheel of at least 8.5" and the stock wheels are 7.5".
Can you make it work?
also, won't it cause any problems when reducing tire pressure off road?
This tire requires a wheel of at least 8.5" and the stock wheels are 7.5".
Can you make it work?
also, won't it cause any problems when reducing tire pressure off road?
#1337
Super Moderator
Yes, you can make it work. I had 12.5" tires on my 6.5" Bronco spare wheel. It drove just fine. If yours is a long term solution then you need to be aware that you'll eat through the center of the tread at a faster rate.
You will have no issues off road in regards to tire pressure.
You will have no issues off road in regards to tire pressure.
#1338
JK Newbie
I ran 35x12.5 on JL rubicon wheels and Spidertrax 1.5" spacers. Worked great offroad. Ran at 15 psi.
Change it up. Hated the Widpeak MT's on road so picked up the submlime Wildpeak AT3W.
Change it up. Hated the Widpeak MT's on road so picked up the submlime Wildpeak AT3W.
The following users liked this post:
karls10jk (01-27-2021)
#1340
2-3" lift with the 7spoke 18" stockers you mentioned. My tires happen to be 295/70R18. No fitment issues once wheel spacers were added and front plastic skid was removed