Cobra CB Install
Well Christmas came early as I started installing one of Santa's gifts already. I ordered the Cobra 75 wxst package for my parents to give to me for Christmas from David at Northridge. There were a few snags, and I can't say enough good things about Northridge. My control box for the unit had some issues and David hopped right on it to fix the problem. Great service again.
Anyway I ran the wire from the Firestick to the dash of the jeep were the box will be mounted behind the glove box. Here are some pics of what I've done today.
Collar on OR-Fab Carrier (has not been tightened yet).

From there ran wire through exsisting hole and rubber grommet


Wire then came up through exsisting hole in tailgate behind the plastic cover. I then ran the antenna wire through the catch strap and followed the wiring that was already there.






Finally had to solder the PL-259 end. As soon as the rst of the parts come I will finish the installation.

Collar on OR-Fab Carrier (has not been tightened yet).

From there ran wire through exsisting hole and rubber grommet


Wire then came up through exsisting hole in tailgate behind the plastic cover. I then ran the antenna wire through the catch strap and followed the wiring that was already there.






Finally had to solder the PL-259 end. As soon as the rst of the parts come I will finish the installation.

Last edited by Dozilla; Dec 2, 2010 at 02:09 PM.


