Full-Traction 6" LA - Home Build
#1
JK Newbie
Thread Starter
Join Date: May 2008
Location: AZ
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.jk-forum.com/forums/images/icons/icon1.gif)
I started this project having little to no knowledge of JK's. I had a 1951 M38 before this, so the project provided a huge learning curve. In the end, it took me about two months to complete in the evenings and on weekends. I waited nearly 7 months for all the parts to arrive so I could start. I at least have the confidence of knowing how the jeep was put together and that it was done right. I know there are quite a few pics, but wanted to share some of the aspects of the build. So far, I am very satisfied with all the choices of parts and their preformance. This was because all I learned here on this site before I began....thanks.
Before the transformation
[IMG]
[/IMG]
Starting the work
[IMG]
[/IMG]
Removed control arm brackets and prep'd
[IMG]
[/IMG]
Added EVO C2 Gussets
[IMG]
[/IMG]
Shocks too short...made custom relocation brackets
[IMG]
[/IMG]
Relocated rear brake lines to avoid rubbinbg at full-stuff
[IMG]
[/IMG]
Finished mounting all 5...kinda a PITA
[IMG]
[/IMG]
Relocated evap can w/Woods' help
[IMG]
[/IMG]
Fitting Rock Sliders
[IMG]
[/IMG]
Mock-up Front done
[IMG]
[/IMG]
Final wiring and fit for rear...after mfg emblem filled with steel!
[IMG]
[/IMG]
Finally done...ready to use
[IMG]
[/IMG]
It's all worth it in the end
[IMG]
[/IMG]
Before the transformation
[IMG]
![](http://my.project-jk.com/data/500/IMG_03813.jpg)
Starting the work
[IMG]
![](http://my.project-jk.com/data/500/IMG_03921.jpg)
Removed control arm brackets and prep'd
[IMG]
![](http://my.project-jk.com/data/500/IMG_03941.jpg)
Added EVO C2 Gussets
[IMG]
![](http://my.project-jk.com/data/500/IMG_04601.jpg)
Shocks too short...made custom relocation brackets
[IMG]
![](http://my.project-jk.com/data/500/IMG_04561.jpg)
Relocated rear brake lines to avoid rubbinbg at full-stuff
[IMG]
![](http://my.project-jk.com/data/500/IMG_04651.jpg)
Finished mounting all 5...kinda a PITA
[IMG]
![](http://my.project-jk.com/data/500/IMG_0387.jpg)
Relocated evap can w/Woods' help
[IMG]
![](http://my.project-jk.com/data/500/IMG_04633.jpg)
Fitting Rock Sliders
[IMG]
![](http://my.project-jk.com/data/500/IMG_04351.jpg)
Mock-up Front done
[IMG]
![](http://my.project-jk.com/data/500/IMG_04362.jpg)
Final wiring and fit for rear...after mfg emblem filled with steel!
[IMG]
![](http://my.project-jk.com/data/500/IMG_0473.jpg)
Finally done...ready to use
[IMG]
![](http://my.project-jk.com/data/500/IMG_0486.jpg)
It's all worth it in the end
[IMG]
![](http://my.project-jk.com/data/500/IMG_0498.jpg)