For those of you that are interested I mounted my Hi-Lift jack to the rear roll bar. I will be putting up pics as soon as i get them developed (old school, I know). I fabricated two brackets and welded 3 1/2" long 1/2" grade 5 bolts into the; Then welded those to the rear roll bar. I also drilled a 3/16" hole in one of the bolts so i could lock it with a small pad lock. I secured the jack with wing nuts for easy removal. It looks very clean.

 

Not even worth hearin about without seein it!



Sounds like a good idea though....

 

i finally got the pics . sorry some are bad they were taken with an old disposable camera.

 

That's the best one I've seen yet. This is probably the way I'll do mine. Thanks for the idea. You should make this a write up and put it in the write up's section.

 

x2 on the writup. That's a very clean setup. Well done !

 

That's a nice job....well done.

 

You rule!

 

There you go...that looks GOOD...unfortunately my 2door doesn't have that extra bar...but it's a awesome mod...

 

I like that a lot. good job

 

nice work. looks great