M&R High5 LED light Kit (protect your investment)
JK Junkie
Joined: Mar 2011
Posts: 2,145
Likes: 4
From: Israel
Four months ago (30/5/2013), I emailed Mike regarding the High5 light kit.
My ARB bull bar would have blocked the lights, so I sent a sketch with measurements, and asked if they have a solution for installing them a bit lower.
Mike replied that he'll take care of making longer mounts.
I asked if this can be solved by buying the 2-raw mount, and installing the 5 lights on the lower raw.
Got no reply to this question.
There was an email exchange, time dragged. The last email I got was --
2 days ago, I sent, cynically --
I'm flying abroad this morning and may have occasional access to a computer until Friday.
My ARB bull bar would have blocked the lights, so I sent a sketch with measurements, and asked if they have a solution for installing them a bit lower.
Mike replied that he'll take care of making longer mounts.
I asked if this can be solved by buying the 2-raw mount, and installing the 5 lights on the lower raw.
Got no reply to this question.
There was an email exchange, time dragged. The last email I got was --
"2013/7/1 M&R Automotive <mandrautomotive@gmail.com>
Hey buddy. I'm going to visit my fabricator probably this weekend
and I will get those brackets done
Have a great day
Mikhail Levinson"
That was 3 months ago. Never heard from them since then.Hey buddy. I'm going to visit my fabricator probably this weekend
and I will get those brackets done
Have a great day
Mikhail Levinson"
2 days ago, I sent, cynically --
"Hey Mike,
Should I forget about these lights?
Best,
[----]"
So far, there's no reply to that.Should I forget about these lights?
Best,
[----]"
I'm flying abroad this morning and may have occasional access to a computer until Friday.
Last edited by GJeep; Oct 6, 2013 at 04:17 AM.
JK Junkie
Joined: Mar 2011
Posts: 2,145
Likes: 4
From: Israel
Four months ago (30/5/2013), I emailed Mike regarding the High5 light kit.
My ARB bull bar would have blocked the lights, so I sent a sketch with measurements, and asked if they have a solution for installing them a bit lower.
Mike replied that he'll take care of making longer mounts.
I asked if this can be solved by buying the 2-raw mount, and installing the 5 lights on the lower raw.
Got no reply to this question.
There was an email exchange, time dragged. The last email I got was --
2 days ago, I sent this, cynically --
I'm flying abroad this morning and may have occasional access to a computer until Friday.
My ARB bull bar would have blocked the lights, so I sent a sketch with measurements, and asked if they have a solution for installing them a bit lower.
Mike replied that he'll take care of making longer mounts.
I asked if this can be solved by buying the 2-raw mount, and installing the 5 lights on the lower raw.
Got no reply to this question.
There was an email exchange, time dragged. The last email I got was --
"2013/7/1 M&R Automotive <mandrautomotive@gmail.com>
Hey buddy. I'm going to visit my fabricator probably this weekend
and I will get those brackets done
Have a great day
Mikhail Levinson"
That was 3 months ago. Never heard from them since then.Hey buddy. I'm going to visit my fabricator probably this weekend
and I will get those brackets done
Have a great day
Mikhail Levinson"
2 days ago, I sent this, cynically --
"Hey Mike,
Should I forget about these lights?
Best,
[----]"
So far, there's no reply to that.Should I forget about these lights?
Best,
[----]"
I'm flying abroad this morning and may have occasional access to a computer until Friday.
May I know why there's no reply to my emails, the last of which from Sept. 26 ?
And why is there no reply to this post, from a week ago ?
Last edited by GJeep; Oct 4, 2013 at 09:27 AM.
Thread Starter
Former Vendor
Joined: Jan 2012
Posts: 107
Likes: 0
From: Van Nuys, Ca
The light kit that we made is for the JK without the bullbar bumper. It's designed to be in the top of the grill opening.
The double row attaches lights together not a separate rail.
About the delay, my daughter was just born and I did not have time to catch up on things.
The double row attaches lights together not a separate rail.
About the delay, my daughter was just born and I did not have time to catch up on things.
Last edited by M&R Automotive; Oct 6, 2013 at 08:13 PM.
JK Junkie
Joined: Mar 2011
Posts: 2,145
Likes: 4
From: Israel
The light kit that we made is for the JK without the bullbar bumper. It's designed to be in the top of the grill opening.
The double row attaches lights together not a separate rail.
About the delay, my daughter was just born and I did not have time to catch up on things.
The double row attaches lights together not a separate rail.
About the delay, my daughter was just born and I did not have time to catch up on things.
I can understand that being pregnant could delay the business
You said you were going to have extensions fabricated.
If that's not possible, I can make my own extensions.
I still prefer the in-grill lights over other options.
If you're interested, please reply to my email, so we can proceed.
Last edited by GJeep; Oct 7, 2013 at 01:03 AM.
Thread Starter
Former Vendor
Joined: Jan 2012
Posts: 107
Likes: 0
From: Van Nuys, Ca
Hey guys we wanted to do something great for the Wrangler community. From now on till the end of the year, we decided to put the kit on sale for just $300 instead of $400. This will hopefully lighten up your
More info can be seen on our website at www.MandRonline.com
More info can be seen on our website at www.MandRonline.com
Last edited by M&R Automotive; Nov 25, 2013 at 08:54 AM.
