hey i would like to start a thread to make it easy for us to look for 2012 3.6 onward MODS like:

performance stuff: CAI, chips, exhausts.....etc

interior:...............

exterior:..............

i will start on what i know till now and hope you guys help us.

once you post, i will update the first post + state the person who gives the new update.

START:

as most of us know AFE came up with catback, Y pipe and CAI

http://afepower.com/shop/application...3.6L&x=57&y=11


UPDATE 23-12-2011

As ravenswood stated MBRP came up with a cat back for 2012 but as far as i know it's for 4doors.

MBRP XP Series Cat Back Exhaust System for 2012 Jeep Wrangler JK 4-Door 3.6L



Gibson also came up with cat back system and as far as i know it's for 4doors.



JEEP Wrangler KIT 2012 RIPP Cold Air Kit for all Snorkels




UPDATE 24-12-2011

As seen in PROJECT JK you need to relocate the vacuum bracket if you want to install an aftermarket bumper

http://project-jk.com/jeep-jk-write-...relocation-kit


UPDATE 25-12-2011

3.6 pentastar 80mm ported throttle body claim to increase HP and better acceleration.


UPDATE 26-12-2011

Edge Performance Chip for the 2012 Wrangler Unlimited by Jeep


http://www.etrailer.com/Performance-...id=20121021889
Don't know if it works with 2012 Jo but they claim it dose


UPDATE 05-12-2012

AFE showed the dyno result of adding AFE exhaust and intake.
http://afepower.com/catalog/54-12092...20DYNO1600.jpg

UPDATE 07-JAN-2012

From JEEPR78

Airaid came up with CAI


http://www.quadratec.com/products/17008_011X_PG.htm


UPDATE 04-FEB-2012

RIPP proud to announce there ultimate super charger for 3.6

https://www.jk-forum.com/forums/show...=1#post2830397



UPDATE 16-02-2012

As sacdaddy03 showed us banks came up with a new CAI
[/QUOTE]



UPDATE 09-05-2012[B]


As desertbuzz reply
Unichip shows in there site that they tune 3.6 finally

http://www.unichip.us/vehicle/vehicl...rangler-JK-36L





UPDATE 31-10-2012

finally diablo sport tunes 2011 JK and 2012 coming soon
http://www.diablosport.com/trinity-update

 

I'm just waiting for AEV to come out with the 2012+ snorkel ... and MBRP (or any manufacturer other than aFe) to confirm if their offroad catbacks work on the 2012+ platform. Rugged Ridge is supposedly updating their A-pillar switch pod for the 2011+ interior.

 

Just upgraded from my 2007 Rubicon to 2012.

Huge difference with new engine and tranny.

I had the leather done with black piping.

 

MBRP has rolled out offroad 2012 catbacks, I just think that it is just slow getting into stores. I live close to were they make them and paid a visit to pick up a system, I opted at the time for the street version. My 2012 is mostly a DD with the odd weekends getting out. They showed me both systems. In retro, I probably should have just picked up the offroad.

 

Awesome, thanks for the info. By the time I've saved enough for something like an exhaust (non-critical item) they'll probably have them out to vendors.

 

This is the front of mine so far...

 

awesome im looking and waiting for them to make a cai for the 3.6 ill have to keep a look at thos thread and update if i find or hear anything

 

Link is in my sig line; quite a list.

 

thanks directedby for posting pics your Rubi looks awesome.

is there any difference if you put the old AEV snorkels cause the 3.8 has almost the same filter location or you are talking about the kit which connects the piping inside.




I have a question for you guys, who do you think the first chip programmers to crack the 2012 PCM?

 

Great thread,I have the body the way i want it for now but do plan on changing the bumper's later on.Right now i am looking into performance like an intake n chip.I do have a MBRP black exhaust on order so that should be a nice upgrade.