What was done to your JK this week?
Eternal ***erator
Joined: Oct 2006
Posts: 18,270
Likes: 3
From: Niagara, New York
Finally installed the Mastercraft Baja RS buckets and Rock Hard Sport Cage that have been sitting in the garage for the last month.
Attachment 111079 Attachment 111080 Attachment 111081 Attachment 111083 Attachment 111084
Attachment 111079 Attachment 111080 Attachment 111081 Attachment 111083 Attachment 111084
I want a cage and new buckets too!
JK Newbie
Joined: Nov 2010
Posts: 9
Likes: 0
From: Grand Prairie, TX
Lifted the Jeep and got new wheels and tires!!!!!
I ordered a RC 2.5" suspension/1.25" body lift combo and decided to install it myself. Saturday morning the wife, kids, and I started the process... Here are the pics... Finished the suspension portion and started the body lift until I ran into trouble getting the studs out of the body mounts (started bending the flange). I decided to take it to a local shop to have the pucks put on sometime next week.
JK Enthusiast
Joined: Nov 2009
Posts: 321
Likes: 0
From: Down by the Beach, MI
Well I've been slowly accumulating projects for spring time. I'll be ordering up black rock 997's all the way around. A full size spare tire, black mountain edition hood deal, black jk sticker for the area under the lonely passenger side tail light and i'll be bedlining the grill. Can't wait for spring to start it all up!
JK Super Freak
Joined: Sep 2010
Posts: 1,651
Likes: 0
From: Montgomery, Il
Jack squat!!! I haven't left the house since Sunday and I'm getting a little cabin fever here. I do have some grab handles coming today to install on the soundbar. 12.50 shipped from online auction site. Searched kayak handles. Fyi
JK Enthusiast
Joined: Nov 2010
Posts: 269
Likes: 0
From: Birmingham, AL
Got all wiring for PIAA 525's installed. I scrapped the PIAA switch and installed two separate switches. One turns on the fogs if the low beams are on. If the fogs are turned on, they only turn on if the low beams are on. They shut down if you turn off lights or go high beam. The second switch does same for driving lights but they are on with high beams only. The LEDs that illuminate the housings are turned on with the parking lights. I mounted two switchs (swall round black type (no light) under the center console ledge that is above the AC control knob - I don't have power windows (half doors). It is awesome as they are not visible sitting in the jeep. They are within easy reach if you know to press there. I also installed one dim green LED pointing down under the same ledge in the center console to give very faint ambient light on the shifter and console in the middle. Now to wait for the new benchmark bumper so I can actually mount the lights.
JK Jedi Master
Joined: Nov 2006
Posts: 15,170
Likes: 0
From: .
Got all wiring for PIAA 525's installed. I scrapped the PIAA switch and installed two separate switches. One turns on the fogs if the low beams are on. If the fogs are turned on, they only turn on if the low beams are on. They shut down if you turn off lights or go high beam. The second switch does same for driving lights but they are on with high beams only. The LEDs that illuminate the housings are turned on with the parking lights. I mounted two switchs (swall round black type (no light) under the center console ledge that is above the AC control knob - I don't have power windows (half doors). It is awesome as they are not visible sitting in the jeep. They are within easy reach if you know to press there. I also installed one dim green LED pointing down under the same ledge in the center console to give very faint ambient light on the shifter and console in the middle. Now to wait for the new benchmark bumper so I can actually mount the lights.
