What was done to your JK this week?
JK Enthusiast
Joined: Sep 2009
Posts: 146
Likes: 1
From: San Diego, CA
Took a couple shots before heading out to study this morning. I'll get some better ones out later.
It's an '07 so those fender flares and inner flare liners were getting pretty faded. A dye kit did the trick for the outside and spray on bedliner gives it a sharp look inside.
Welding on the angles was courtesy of my little brother who is just learning the trade. Next step is
1) Drill holes for my other pair of driving lights
2) Weld a bull bar onto the bumper.
My brother also is scheming a storage project in lieu of a winch mount. I can't afford a winch right now so for the time being, the plan is to weld a steel box onto the inside of the C-channel. Put a hinged door and lock on it. Store jumper cables, tools etc. inside.
It's an '07 so those fender flares and inner flare liners were getting pretty faded. A dye kit did the trick for the outside and spray on bedliner gives it a sharp look inside.
Welding on the angles was courtesy of my little brother who is just learning the trade. Next step is
1) Drill holes for my other pair of driving lights
2) Weld a bull bar onto the bumper.
My brother also is scheming a storage project in lieu of a winch mount. I can't afford a winch right now so for the time being, the plan is to weld a steel box onto the inside of the C-channel. Put a hinged door and lock on it. Store jumper cables, tools etc. inside.
Last edited by adammj; Feb 27, 2011 at 07:59 PM.
JK Super Freak
Joined: Dec 2009
Posts: 1,057
Likes: 0
From: Charlotte, NC
Had to pull my light bar off to have windshield number 5 in 3 months installed. Hope this time its a quality piece of glass and installed properly. They messed it up the other 4 times, hence having to get it replaced again.
