What was done to your JK this week?
I took the doors off and tried out the new Cloverpatch convert-a-top my wife got me for X-mas. A couple notes about using it, first unlike what the instructions say, there's no rolling up the sail panels as they say, the re-enforcement pieces inside prevent that from happening so instead I stuffed the ends into the pouches and strapped them down at the base of the seatbelt rollers. I also had to invest in a couple compression straps for the top to keep the panels from acting like air brakes while driving. Overall though I like the look, almost Willys MB-esque...
If that's not enough I re-mounted my doors-off mirrors and I also put on the new Teraflex stickers, thanks guys!!!
If that's not enough I re-mounted my doors-off mirrors and I also put on the new Teraflex stickers, thanks guys!!!
JK Freak
Join Date: Dec 2008
Location: Shreveport, LA
Posts: 712
Likes: 0
Received 0 Likes
on
0 Posts
No serious stuff YET. Got a few new toys though. Bought a new air compressor, air tools, and a plastic welder...among a few other goodies. Tomorrow...when I decide to get my lazy arse out of the bed...I am gonna do the stubby front bumper mod. Already had the Dewalt sawzall and unused metal blades. After the bumper mod...oil change on the JK and the GF's mini van (read: loser cruiser according to my 9-year-old son). BBQ kebabs tomorrow night once it is all done. I love my life.
JK Enthusiast
Join Date: Dec 2010
Location: Corona, CA
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
In all fairness, this took me a bit longer than 1 week, but here is what I did over the past 4.
Rubicon Transfer Case
Rubicrawler
RIPP Supercharger and intercooler and LongTube Headers
Custom Exhaust
Cut off rear shock mounts and made new skids
PSC Hydro Assist
Finished Lighting
Built a Dana 44 from an 08 rubi with C gussets, skids, truss,
Reid Racing Knuckles
Dynatrac ball joints
ARB Lockers Front and Rear
35 spline shafts in rear
35 spline RCV cv shafts in front
River Raider Skid Set
New air distribution system,
New electrical switches
Fire extinguisher
Rigid industries LED Driving, Fog and Reverse lights
Benchmark Stage 3 dual battery
Painted Hard top and installed Hothead Liners
Custom painted control arms, diff covers, etc.
Coming this week:
Roll Cage
SolTek Fuegos for windsheild
5 point harness bars
Corbeau Baja RS reclining seats
5 points
TF Big Brake Kit (retry with som mods from TF)
and drum roll.....the pics..sorry some of them are crappy iphone pics
Rubicon Transfer Case
Rubicrawler
RIPP Supercharger and intercooler and LongTube Headers
Custom Exhaust
Cut off rear shock mounts and made new skids
PSC Hydro Assist
Finished Lighting
Built a Dana 44 from an 08 rubi with C gussets, skids, truss,
Reid Racing Knuckles
Dynatrac ball joints
ARB Lockers Front and Rear
35 spline shafts in rear
35 spline RCV cv shafts in front
River Raider Skid Set
New air distribution system,
New electrical switches
Fire extinguisher
Rigid industries LED Driving, Fog and Reverse lights
Benchmark Stage 3 dual battery
Painted Hard top and installed Hothead Liners
Custom painted control arms, diff covers, etc.
Coming this week:
Roll Cage
SolTek Fuegos for windsheild
5 point harness bars
Corbeau Baja RS reclining seats
5 points
TF Big Brake Kit (retry with som mods from TF)
and drum roll.....the pics..sorry some of them are crappy iphone pics
You did all that?
JK Freak
Join Date: Jan 2011
Location: Denver Colorado
Posts: 523
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by JKProfessor
You know it is hard to tell cause I did so much at once. But something made the steering great! PSC, Knuckles, Ball joints. I can say, they are beefy as all get out and I can tell, they were worth the $$. Sick of replacing ball joints! Hopefully now, not as often, and these I can rebuild!
JK Freak
Join Date: Dec 2006
Location: Valley Center, Ca
Posts: 508
Likes: 0
Received 0 Likes
on
0 Posts
JK Freak
Join Date: Dec 2006
Location: Valley Center, Ca
Posts: 508
Likes: 0
Received 0 Likes
on
0 Posts