What was done to your JK this week?
JK Freak
Joined: Jun 2008
Posts: 702
Likes: 0
From: Blodgett, OR
Dual Batteries Installed
Installed a Rugged Ridge Dual Battery tray and connected two new Diehard Platinum batteries together through a voltage sensitive relay/isolator. Now I have a Main battery for starting and an auxiliary battery for lights, winch and a refrigerator.
-meljr
-meljr
JK Enthusiast
Joined: Sep 2011
Posts: 439
Likes: 0
From: San Diego, CA
Originally Posted by meljr
Installed a Rugged Ridge Dual Battery tray and connected two new Diehard Platinum batteries together through a voltage sensitive relay/isolator. Now I have a Main battery for starting and an auxiliary battery for lights, winch and a refrigerator.
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=304777"/><img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=304778"/><img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=304780"/>
-meljr
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=304777"/><img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=304778"/><img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=304780"/>
-meljr
JK Junkie
Joined: Nov 2010
Posts: 3,802
Likes: 3
From: Kitchener
Finally got my Engo 10k winch installed with synthetic line this winch with a
Rugged Ridge XHD bumper PITA to install.... A pic of testing it out!!! Amazing pulled a 4dr thru a mud hole and water more then 1/2 way up the tires.
Rugged Ridge XHD bumper PITA to install.... A pic of testing it out!!! Amazing pulled a 4dr thru a mud hole and water more then 1/2 way up the tires.
JK Enthusiast
Joined: Nov 2010
Posts: 274
Likes: 0
From: Sacramento, Ca
Installed a Rugged Ridge Dual Battery tray and connected two new Diehard Platinum batteries together through a voltage sensitive relay/isolator. Now I have a Main battery for starting and an auxiliary battery for lights, winch and a refrigerator.
Attachment 304777Attachment 304778Attachment 304780
-meljr
Attachment 304777Attachment 304778Attachment 304780
-meljr
I installed my C/B antenna mount
JK Junkie
Joined: Apr 2011
Posts: 2,284
Likes: 2
From: Scotchdale AZ
I'll post pics later, but I bedlined my wheel plate on the OR-FAB tire carrier, took top off and put on homemade hardtop carrier for the first time, installed the full size spiderweb shade (had JKINI), put in the new Gen2 Quadratec floor mats (fit amazing), cleaned and detailed up, got tires rotated, put on the Daystar D-Ring Isolators and mounted d-rings on bumper, installed rubber O-Rings on each side of d-rings so they don't slide back and fourth (thought of that all by myself, no forum help) GO ACE HARDWARE!!