That looks sharp... I loke the idea. Has me thinking now...

My waist rails are getting a little scratched as well... Might have to give this a go. Im assuming you just cleaned well and sprayed? Cant imagine taking sandpaper to the paint.

 

Installed my 8000k hids in my headlights and new fog lights with angel eyes..... 8000k lighting up the street with new fogs on...... stock headlights..... what a difference

 

I sanded, very lightly...just enough to scuff up the clear coat. Took all of five minutes to scuff.

 

I did, used a prograde (fine) sanding sponge, hit it very lightly

 

Installed my MBRP catback exhaust. I have to say that it really doesn't make that much of a difference without a tuner.

 

I've been there. Really cool place!

 

I had to use a green scotch brite pad on mine. When I bought it used someone nicked it pretty good taking the hard top off. Some of the places I had to take to the bare metal prior to bed lining. Looks good and has not come off in three years.

 

Installed aluminum upper links on the rear and streached the wheelbase back another 1" to center the wheels in the wheel wells, moved the lower link mounts on the frame side for more ground clearance, and ran a 12 volt outlet to the rear of the Jeep for the ARB fridge. Also mounted a lockbox under the drivers seat and got the front seats back in.

 

Was bored... subs are facing forward so I can hear it when the top is off.

 

Well I added power door locks today and let me tell it was a pain in the @$$.