You got that right brother

97% of Egypt is covered with sand!

 

finally replace my Sahara wheels with some Mountain edition take offs.

 

Installed daystar 3/4" front coil spacers to level out the front of my JK
and drilled under my mirrors for better water drainage after washing it.

 

First time changing the oil myself, air filter replaced with an K&N filter, tire rotation, brake fluid flush and replace and removed the Wranglar Unlimited sticker so I have space for the JK sticker when it arrives. All this done while hanging with the fellas and drinking some Angry Orchards. Good day! Btw I used 4lo for the first time to push a dead tree also. Great time.

 

LMAO. He said Jeep and wax.

 

Lost 4 quarts of oil on the highway because the dealership didn't tighten the oil filter tight enough

 

Point and case of why you don't do anything at the "dealership."

 

Did you have to do anything custom to mount that on the inside of your tailgate?

 

What he said

 

I bought the standard mount, then took off my spare where there is a vent behind the tire carrier. I removed the vent to get access to the backside of the sheet metal of the inner tailgate. I then drilled 4 holes and attached the mount with the included hardware. Was pretty easy to do, but you have to be ok with drilling into the tailgate. Seems to be quite stable. If you search google there was one site that did the same thing but also added some "bumpers" to prevent movement.