What was done to your JK this week?
JK Enthusiast
Join Date: Aug 2012
Location: Ward, AR
Posts: 262
Likes: 0
Received 0 Likes
on
0 Posts
2.5" lift and 37's
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=455141"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=455142"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=455143"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=455144"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=455141"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=455142"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=455143"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=455144"/>
JK Junkie
LOL. I have a tf 2.5 lift but I ditched the front springs for rk progressive rate springs. 1.25 RC body lift. Bilstein shocks for a 4" lift up front. And for the wheels they are stock, painted them flat black with 1.5" spidertrax wheel spacers and a couple of washers in the steering stops so the tires don't rub the frame at full lock
JK Super Freak
Join Date: Apr 2012
Location: Pittsburgh, PA
Posts: 1,208
Likes: 0
Received 0 Likes
on
0 Posts
Just got my Jeep and I figure that new type of dashboard don't have to many surfaces to mount any phone holder.
This is what I came up with...
Flat aluminium bar - $8 from HomeDepot
Double sided tape - $11 from HomeDepot
Plasti Dip and Rivets - I had them in the garage
RokForm iPhone 4S case and attachment - $39 (it is on sale on their website)
This is finish product...
http://www.flickr.com/photos/53209482@N08/8716243376/
http://www.flickr.com/people/53209482@N08/
http://www.flickr.com/photos/53209482@N08/8715124099/
http://www.flickr.com/people/53209482@N08/
http://www.flickr.com/photos/53209482@N08/8715124773/
http://www.flickr.com/people/53209482@N08/
This is what I came up with...
Flat aluminium bar - $8 from HomeDepot
Double sided tape - $11 from HomeDepot
Plasti Dip and Rivets - I had them in the garage
RokForm iPhone 4S case and attachment - $39 (it is on sale on their website)
This is finish product...
http://www.flickr.com/photos/53209482@N08/8716243376/
http://www.flickr.com/people/53209482@N08/
http://www.flickr.com/photos/53209482@N08/8715124099/
http://www.flickr.com/people/53209482@N08/
http://www.flickr.com/photos/53209482@N08/8715124773/
http://www.flickr.com/people/53209482@N08/
Ummm.....it was the right thing to do personally and professionally at this point of my life. Not many of my colleagues could get in it to go to meetings. Including my VP. So....I'll pay off the truck in 2 yrs and then get a slightly used JK to fix up. I know much more now than I did 2 yrs ago and will correct mistakes to make it even tougher. This was my 4th wrangler.
JK Enthusiast
Join Date: Aug 2012
Location: Ward, AR
Posts: 262
Likes: 0
Received 0 Likes
on
0 Posts
LOL. I have a tf 2.5 lift but I ditched the front springs for rk progressive rate springs. 1.25 RC body lift. Bilstein shocks for a 4" lift up front. And for the wheels they are stock, painted them flat black with 1.5" spidertrax wheel spacers and a couple of washers in the steering stops so the tires don't rub the frame at full lock
I have 1.5" spacers as well with a 3.5" MC lift but the front rub the control arms just a tad at full articulation. Eventually I'm gonna get beadlocks but until then I'm just looking at some cheap steel wheels with 4" bs. I think I'll just be a little more comfortable without spacers, just one less thing that can break. Very nice setup though!
JK Newbie
Join Date: Nov 2012
Location: Fredericksburg, VA - New Orleans, LA
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Chopped my bumper, Cut the front and rear fenders, added hood lights, made a D Box for my electronics, put in a DayStar Rocker switch panel.