What was done to your JK this week?
You can see how the piece is placed between the tray and metal tray holder
This image the three bolts to the fender I loosened the middle bolt slightly and loosened the top and bottom bolts more than the middle one then jammed the small mc piece in between the fender and the body then tightened the upper and lower bolts to the smitty fender. Does not move at all even at highway speeds.
Get lots of compliments on the mc inner fenders liners
I always run with my doors off so I put a deterrent from stealing my floor mats.
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=472053"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=472052"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=472054"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=472055"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=472056"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=472053"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=472052"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=472054"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=472055"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=472056"/>
Hope the pics help.
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=472151"/>
You can see how the piece is placed between the tray and metal tray holder
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=472153"/>
This image the three bolts to the fender I loosened the middle bolt slightly and loosened the top and bottom bolts more than the middle one then jammed the small mc piece in between the fender and the body then tightened the upper and lower bolts to the smitty fender. Does not move at all even at highway speeds.
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=472152"/>
Get lots of compliments on the mc inner fenders liners
Hope the pics help.
Attachment 472151
You can see how the piece is placed between the tray and metal tray holder
Attachment 472153
This image the three bolts to the fender I loosened the middle bolt slightly and loosened the top and bottom bolts more than the middle one then jammed the small mc piece in between the fender and the body then tightened the upper and lower bolts to the smitty fender. Does not move at all even at highway speeds.
Attachment 472152
Get lots of compliments on the mc inner fenders liners
Attachment 472151
You can see how the piece is placed between the tray and metal tray holder
Attachment 472153
This image the three bolts to the fender I loosened the middle bolt slightly and loosened the top and bottom bolts more than the middle one then jammed the small mc piece in between the fender and the body then tightened the upper and lower bolts to the smitty fender. Does not move at all even at highway speeds.
Attachment 472152
Get lots of compliments on the mc inner fenders liners
Thanks
Last edited by Lusky; 06-26-2013 at 05:16 PM. Reason: changed my thoughts
Hope the pics help.
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=472151"/>
You can see how the piece is placed between the tray and metal tray holder
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=472153"/>
This image the three bolts to the fender I loosened the middle bolt slightly and loosened the top and bottom bolts more than the middle one then jammed the small mc piece in between the fender and the body then tightened the upper and lower bolts to the smitty fender. Does not move at all even at highway speeds.
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=472152"/>
Get lots of compliments on the mc inner fenders liners
When I first installed them it felt like I was gonna flip the jeep over on turns! But after an hour or so of driving I noticed that the ride was softer, the turns were easier and no more rattling from the previous disconnects on the old sway bar. Have yet to go over any rocks or flex the axle, but I'm glad I got it. Drove the jeep from Chicago to myrtle beach with no problems and felt very confident on the highway at 80 mph. Don't have to worry about disconnects anymore.
Aha I see a difference between the small pieces. Yours measure out to over 3 inches and have the round cylinder pieces welded on. Mine on the other hand measure out to 2 3/4 inches and do NOT have the cylinders. That's weird? Did yours match the model year? Do you have a 2012 or newer? I have a 2012 and specified that on my order. Def give them a call.
Had to get a new power steering pump. Went out on me on the interstate at about 70mph. Steering wheel seized up almost instantly and avoided serious catastrophe. Easily one of the scariest things while running a 4" lift and 35's. my rig is a '12 unlimited. Crazy!
Sent from my iPad using JK-Forum
Sent from my iPad using JK-Forum