Good idea on the fix.

I got a few questions about the process. Here is the link I used for plans. I changed the measurements a little. 19" for the uprights (stops below the door handles), 16" for the crossbars (so the rear doors still stand upright), and 6" between each for the door thickness (pressure aids in keeping it upright). I also wrapped a ratchet strap around the whole thing while stored. I don't want to take a chance of a joint failing and the door come crashing down. My materials list was only 3x 10'x1" PVC. Make sure you use the cold weather tubing since the walls are far thicker. I think it only cost $35 in material because I already had the 2x4"s and casters.

Jeep Wrangler 4 Door Rack

 

Thanks Chuck. Gonna do this one soon!

 

Just got done installing a new battery. My lights were left on maybe 5 minutes while I went in to get my breakfast so I just said screw it & got it replaced.

 

Took the hard top put it in storage and installed the soft top with my new red spiderweb shade.

 

We need pics of that top Levi.

 

Making progress on my stock bumper mod.

Originally installed the Rough Country end caps to make it stubby. Liked it ok but recently decided to strip the ugly plastic off. Liked it more but wanted the fog lights back so did this:



Cleaned up the tow points and rattlecanned some flat black



Same paint on bumper after mods



Now that the pieces are done, just have to put it back together.

 

About to pull the trigger on 16" XD Addicts with 33" Mickey Thompsons ATZP3 from stock wheels... any thoughts? Just lookin for some opinions and input



The addicts on a diff tire.





And the Mickey Thompson

 

How did you know how big to make it? Did you just measure your doors?

 

I have the ATZP3s and like them a lot. They aren't as quiet as Duratracs, but they're not as noisy as mud terrains either. Tolerable, even when the doors are off. I've only wheeled with them once and I was very pleased at how well they did in the mud and on the few rocks I was on.

 

good job Kapt!

giggity