What was done to your JK this week?
JK Super Freak
Joined: Aug 2007
Posts: 1,315
Likes: 1
From: Texas
Fender chop / blk lights
Joined the chopped fender club today. Thanks for all the pics and write ups! WOL!! Finished the back fenders and put in the inner fenders on the front only. Maybe if I had bigger tires it would fill up the space???? I need 35's to balance the look. My wife says I need to balance the checkbook first. 
While I was painting I blacked out the tail lights and front turn. It is a special paint that allows the light to show right through. Duplicolor VHT Nightshades. It works very well and the brake lights look just as bright as they did before in the day or night. Trick paint is all I can say.
I used bedliner in the back. I also got led markers installed.
Rotated and balanced the tires...all 5. Thanks Discount Tire.
While I was painting I blacked out the tail lights and front turn. It is a special paint that allows the light to show right through. Duplicolor VHT Nightshades. It works very well and the brake lights look just as bright as they did before in the day or night. Trick paint is all I can say.I used bedliner in the back. I also got led markers installed.
Rotated and balanced the tires...all 5. Thanks Discount Tire.
Last edited by Geeper4x4; May 4, 2009 at 04:55 AM.
JK Enthusiast
Joined: Apr 2008
Posts: 435
Likes: 0
From: Baytown, Texas
JK Enthusiast
Joined: Aug 2008
Posts: 282
Likes: 0
From: Goddard, KS
EVO C2 Gussets, LCA Skids, and JKS Rear Trackbar Brace
Just though I'd share the finished products - pardon the quality of the pics...night shots 
Had forgotten that the husband of the woman who cuts my hair is a welder/fabricator
needless to say Saturday I went over and he sized up the welding job and today I went over to complete the job. I did all the nuts/bolts work while he did the welding.
I know it recommends to separate the ball joints and to remove the lower control arm, but we decided that by utilizing stitch welding techniques plus having several wet towels around and going back and forth between the driver and passenger side alternating would allow us to not overheat the effected areas. I hit em up with a couple coats or primer then slapped on some black Rustoleum hammer rattle can paint...And here is the results...needless to say I'm very pleased with the results
Had forgotten that the husband of the woman who cuts my hair is a welder/fabricator
needless to say Saturday I went over and he sized up the welding job and today I went over to complete the job. I did all the nuts/bolts work while he did the welding. I know it recommends to separate the ball joints and to remove the lower control arm, but we decided that by utilizing stitch welding techniques plus having several wet towels around and going back and forth between the driver and passenger side alternating would allow us to not overheat the effected areas. I hit em up with a couple coats or primer then slapped on some black Rustoleum hammer rattle can paint...And here is the results...needless to say I'm very pleased with the results
JK Super Freak
Joined: Oct 2007
Posts: 1,476
Likes: 0
From: Jackson Hole, Wyoming
Installed the Light Force 140 Lance lights on the Warn front bumper today. I didn't get a chance to take a drive and try them yet but they sure light up the garage.
Close look at the front bumper.
Lights on the front of the Rubi bumper.
Close look at the front bumper.
Lights on the front of the Rubi bumper.
