What was done to your JK this week?
JK Jedi Master
Joined: Aug 2007
Posts: 15,665
Likes: 4
From: Hammond Louisiana
I have 4in superlift. The rear springs kinda sagged too much for me because with a 35 on the taigate and the 200+ pounds of tools in the back, when I went on vacation or camping, it was seriously nose high. I added a 1 3/4 in spacer to the rear which gives me some rake, but evens out and still squats in the rear when loaded. I have a smitty xrc in my garage to put my 37in spare on. I also have 4in tera coils and 1in spacers in my computer room waiting for install, I may leave the spacers out of the front until I get a winch and heavy bumper on the front, but I think the rear height will be about the same.
...I remember you mentioning you have a 1" body lift, but what is the size of your suspension lift....thanks...
JK Freak
Joined: Jun 2009
Posts: 552
Likes: 0
From: Johnson City, TN
Just installed 3" fabtech basic lift and 35's on 15" soft 8's. Next, a buddy's wanting to sell me a bulldog stubby winch bumper for $250... think I might take it if I can get him down to $200.
JK Freak
Joined: Jun 2008
Posts: 819
Likes: 0
From: Back in the world, Belleville, Ont
I made (will a lot of help from my neighbour) custom rock rails
I wanted to keep the Rubi sliders which hide the pinch seam really well so I reinforced the sliders by welding the 6 tabs that go thru the pinch seam to the back of them (building up the gap as required). This should help take some of the flex out of them.
I don’t plan on using them as steps but for the 8 year old, they should help her out quite a bit.
I wanted to keep the Rubi sliders which hide the pinch seam really well so I reinforced the sliders by welding the 6 tabs that go thru the pinch seam to the back of them (building up the gap as required). This should help take some of the flex out of them.
I don’t plan on using them as steps but for the 8 year old, they should help her out quite a bit.
JK Enthusiast
Joined: Aug 2007
Posts: 356
Likes: 0
From: Houston, TX
Well I had ordered a Smittybilt XRC10HD winch/air compressor back in March when they first came out but it has never made it into production. They were now saying that it will be 1010 before they start shipping so I decided to go ahead and pay the extra money for the Warn PowerPlant HP. Just got it yesterday mid morning and had it installed by mid afternoon.
This coming week I will be re-gearing and maybe an exhaust relocation.
This coming week I will be re-gearing and maybe an exhaust relocation.
JK Newbie
Joined: Sep 2009
Posts: 71
Likes: 0
From: Rock Hill,SC
Changed Oil
Installed Airaid CAD - Pretty easy, No as I went pictures.
Here it is finished.
Did a full look around for once and noticed this, it just questions me...
I dont know if factory does it normal or I hit something!?!?
Is there suppose to be a huge dent in my exhaust pipe before muffler?
Installed Airaid CAD - Pretty easy, No as I went pictures.
Here it is finished.
Did a full look around for once and noticed this, it just questions me...
I dont know if factory does it normal or I hit something!?!?
Is there suppose to be a huge dent in my exhaust pipe before muffler?
JK Jedi
Joined: Apr 2008
Posts: 4,470
Likes: 1
From: Westchester, NY
Changed Oil
Installed Airaid CAD - Pretty easy, No as I went pictures.
Here it is finished.
Did a full look around for once and noticed this, it just questions me...
I dont know if factory does it normal or I hit something!?!?
Is there suppose to be a huge dent in my exhaust pipe before muffler?
Installed Airaid CAD - Pretty easy, No as I went pictures.
Here it is finished.
Did a full look around for once and noticed this, it just questions me...
I dont know if factory does it normal or I hit something!?!?
Is there suppose to be a huge dent in my exhaust pipe before muffler?
JK Junkie
Joined: Nov 2008
Posts: 2,498
Likes: 5
From: Long Island, NY
Good design, eh?
