Rotated the tires and installed new black lug nuts. They look nice with the stock rims.I also installed some front LCA's but I haven't driven it yet. I bought them from a member on here (nice guy to deal with) Thanx Wyatt. sorry no pic. It's a little cold here in NH . It's 5* out right now.

 

Installed my front license plate holder on the winch roller fairlead so I'm legal again. Although I much preferred the look of the fairlead in the stock bumper better.

 

like this?

 

nice are they maglite mounts?

 

Yup! Even at full retail it's $6 a pair.

 

After failing my VA state inspection last week I installed new rear brake pads... cut and raised my third brake light... re-aimed my headlights... and passed!!!

 

Just made one good part out of two bad parts...

I took the good rear driveshaft boot off of a freebie donor (that had a good dust boot but a torn CV joint boot) and installed it onto my rear DS which is good but missing the boot. I took it apart, removing the rear section from the jeep, cleaned, sanded off any surface rust, regreased and then installed the boot and re-assembled the whole thing. Good for another million miles (or one good high center stuck!).

What's the torque setting on those 8mm bolts, anyway?

 

Are you going to push the 6.5s with an amp or just the stereo? I'm going to replace my factory speakers also, but can't decide if I want to put an amp on them or if it will sound good enough pushed by the stereo.

 

I did this today:
https://www.jk-forum.com/forums/show...=1#post1507185

 

Got a couple things done this past weekend and also got in some backordered Christmas gifts. First i did the pinch seam mod with "L" shaped aluminum and spray on bed-liner.
Before:


After:



Installed my Smittybilt Rocker Guards:



Got in my Rugged Ridge front floor liners and cargo liner:



Tinted my lights with the Nightshades:



All in all, a very productive weekend!