Dash Top Console
JK Enthusiast
Joined: Apr 2007
Posts: 189
Likes: 0
From: Italy
I got the daystar console from Quadratec. Installed in 5 minutes, was perfect fit and comes in handy for Shades, Cigs, etc. You will need a small Philips screwdriver in order to take of the Compass bozo from the stock Dash Top and fit it under the Daystar (pillars for screws are already on the Daystar). You'll also have to recover those little copper thinghies from the stock piece.
Just lift up the part closest to the windshield, tilt it up and slide it off. Reassemle reverse...
Shade of grey is a little darker than my interiors, but I hardly notice it.
In offroad stuff may slide a bit, so I got one of those funny mats made out of that goo they make also sticky toys of...
This stuff is REALLY sticky and when it gets dirty you just wash it in handwarm water, shake it dry and it sticks like new. Doesnt leave marks around as there is no glue involved. Looks like a mat of transparent silicone (to give you an idea).
Just lift up the part closest to the windshield, tilt it up and slide it off. Reassemle reverse...
Shade of grey is a little darker than my interiors, but I hardly notice it.
In offroad stuff may slide a bit, so I got one of those funny mats made out of that goo they make also sticky toys of...
This stuff is REALLY sticky and when it gets dirty you just wash it in handwarm water, shake it dry and it sticks like new. Doesnt leave marks around as there is no glue involved. Looks like a mat of transparent silicone (to give you an idea).
