P0306 :(
#1
JK Newbie
Thread Starter
Join Date: Feb 2012
Location: Wilton, ct
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
P0306 :(
Check engine light came on...my 2012 Rubi is now in the shop.
The code tells me that cylinder 6 has mis-fired...fingers are crossed...
Thanks to the forum for giving me the ability to walk into the service department well informed!
The code tells me that cylinder 6 has mis-fired...fingers are crossed...
Thanks to the forum for giving me the ability to walk into the service department well informed!
#2
JK Jedi Master
It will be interesting to see how well the service department is informed.
#3
JK Enthusiast
Join Date: Dec 2009
Location: San Marcos, TX
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
I had the same thing happen to my 2012 – with 10600 miles.
They flashed and cleared the code – it threw the same code again.
They did a bleed-down test to see if that cylinder would hold compression.
Which it didn’t, so it was time for a new head.
They did an excellent job fixing my JEEP.
Mine runs like a scolded dog and it gets better MPG then before. Have had no problems since – and I have found a stealership I can actually trust.
#4
JK Newbie
Thread Starter
Join Date: Feb 2012
Location: Wilton, ct
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
******
I had the same thing happen to my 2012 – with 10600 miles.
They flashed and cleared the code – it threw the same code again.
They did a bleed-down test to see if that cylinder would hold compression.
Which it didn’t, so it was time for a new head.
They did an excellent job fixing my JEEP.
Mine runs like a scolded dog and it gets better MPG then before. Have had no problems since – and I have found a stealership I can actually trust.
I had the same thing happen to my 2012 – with 10600 miles.
They flashed and cleared the code – it threw the same code again.
They did a bleed-down test to see if that cylinder would hold compression.
Which it didn’t, so it was time for a new head.
They did an excellent job fixing my JEEP.
Mine runs like a scolded dog and it gets better MPG then before. Have had no problems since – and I have found a stealership I can actually trust.
How long was your rig in the shop?
#6
JK Newbie
Thread Starter
Join Date: Feb 2012
Location: Wilton, ct
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Just got the Jeep back from the dealer! New cylinder head in place...hopefully smooth sailing ahead!
The dealership was great in how they dealt with everything...even got the jeep back to me a day early!
The dealership was great in how they dealt with everything...even got the jeep back to me a day early!