bhawghead

Hey guys, I have a 2014 unlimited and has been giving a p0341 code for several weeks and going in and out of limp mode, I have changed both camshaft position sensors, and the problem is still there. I was thinking I had read that there was a TSB bulletin on this but my sensors did not match the serial numbers they were giving. Anyone have any advice on what to do next, thanks in advance.

rob_engineer

It's probably not gonna help, but I would make sure your battery is good and the connections to the battery are clean and tight. Sensors do whacky things if they get intermittent voltage, or a different voltage than they expect.