Notices
JK Talk General discussion forum regarding thoughts, opinions and rumors about the Jeep JK Wrangler or related subjects that don't quite fit in the Modified, Stock or Electronics forums.

Supertop NX

Thread Tools
 
Old Mar 1, 2012 | 04:30 PM
  #1  
Tsmith1362's Avatar
Thread Starter
JK Enthusiast
 
Joined: Nov 2011
Posts: 146
Likes: 0
From: Avilla, Indiana
Default Supertop NX

My Bestop Supertop NX showed up today and I'm pumped. Any suggestions/pointers on installation? Do I need to lay it out or anything?
Reply
Old Mar 1, 2012 | 04:54 PM
  #2  
ifinallygota21v's Avatar
JK Newbie
 
Joined: Feb 2010
Posts: 66
Likes: 0
From: crown point, in
Default

From what I have read you should lay it out in the sun so it will stretch out when you go to put it on
Reply
Old Mar 1, 2012 | 04:59 PM
  #3  
Tsmith1362's Avatar
Thread Starter
JK Enthusiast
 
Joined: Nov 2011
Posts: 146
Likes: 0
From: Avilla, Indiana
Default

So that means I should wait until warmer weather before putting it on? Live in Indianapolis....
Reply
Old Mar 1, 2012 | 05:12 PM
  #4  
ifinallygota21v's Avatar
JK Newbie
 
Joined: Feb 2010
Posts: 66
Likes: 0
From: crown point, in
Default

I'm no expert but if you are feeling strong then go for it. If I had a new top I would probably suffer through it just to see it on.
Reply
Old Mar 3, 2012 | 04:59 AM
  #5  
dgcornwell3's Avatar
JK Newbie
 
Joined: Feb 2012
Posts: 1
Likes: 0
From: Petersburg, VA
Default Shrinkage

I've heard that the fabric is wrinkled when you get it. It's best to leave it out in the sun in 72+ degrees while putting the hard ware together. You may have a problem stretching the top to the front, but I say go for it!! And let us know how it goes.


-DC
Reply




All times are GMT -8. The time now is 02:56 PM.