Rugged Ridge Snorkel Install (Lot of Pics)
#32
JK Super Freak
Thread Starter
Join Date: Jul 2011
Location: Goodyear, Arizona
Posts: 1,567
Likes: 0
Received 0 Likes
on
0 Posts
Glad I could help!
I highly doubt it. Even so, that's why it has the lower part that traps and drains water.
I highly doubt it. Even so, that's why it has the lower part that traps and drains water.
#34
JK Enthusiast
Join Date: Dec 2011
Location: Yakima, WA
Posts: 436
Likes: 0
Received 0 Likes
on
0 Posts
Last edited by Cpfiremn; 08-13-2013 at 07:35 AM.
#36
Well I installed mine yesterday. I don't know about anyone else but it took me longer then the 4-5 hours I think. I ran into trouble when it came time to line the cowl, Z mount and the snorkel up and bolt it down. Nothing lined up at all. I found it was because of the way it was manufactured and the hole placement. I finally ended up just bolding the fender side back on and making sure everything was good and tight, drilled the holes and bolted it all down. So far I haven't had any problems out of it but it's only been a day.
Last edited by P1Rh0; 08-16-2013 at 08:24 AM.
#37
Well I installed mine yesterday. I don't know about anyone else but it took me longer then the 4-5 hours I think. I ran into trouble when it came time to line the cowl, Z mount and the snorkel up and bolt it down. Nothing lined up at all. I found it was because of the way it was manufactured and the hole placement. I finally ended up just bolding the fender side back on and making sure everything was good and tight, drilled the holes and bolted it all down. So far I haven't had any problems out of it but it's only been a day.
But all in all this writeup helped a ton along with the instructions that came with it.
But all in all this writeup helped a ton along with the instructions that came with it.
#39
JK Super Freak
Thread Starter
Join Date: Jul 2011
Location: Goodyear, Arizona
Posts: 1,567
Likes: 0
Received 0 Likes
on
0 Posts
Thanks!