Window storage
I'm not sure if this has been covered or not, but here is my solution for my soft top window storage.
Supplies:
2- #8x3" wood screws (laying around)
1- 4'x2" Box of sticky back Velcro from Lowes (about $8)
1- 8"x55" piece of scrap wood (laying around)
2-
The rest is super easy:
- Screw the board into some studs (48" apart) and leave the screws sticking out about 1".
- Hold side windows vertical to the board with the rear facing up and mark the edges. Cut velcro into 2' strips and attach to the area you just marked. Trim velcro at the edge of the board.
- Slap your side windows on the velcro, place the rear window on the exposed screws.
- Drink some more beer
Supplies:


Ready to go:


Done:

Supplies:
2- #8x3" wood screws (laying around)
1- 4'x2" Box of sticky back Velcro from Lowes (about $8)
1- 8"x55" piece of scrap wood (laying around)
2-

The rest is super easy:
- Screw the board into some studs (48" apart) and leave the screws sticking out about 1".
- Hold side windows vertical to the board with the rear facing up and mark the edges. Cut velcro into 2' strips and attach to the area you just marked. Trim velcro at the edge of the board.
- Slap your side windows on the velcro, place the rear window on the exposed screws.
- Drink some more beer
Supplies:


Ready to go:


Done:

Last edited by joearod524; Jan 24, 2010 at 08:17 AM.


