2" Skyjacker BB & 33x12.5x17 Cepek MC
Thread Starter
JK Enthusiast
Joined: Jul 2007
Posts: 306
Likes: 0
From: Bucks Co., PA
2" Skyjacker BB & 33x12.5x17 Cepek MC
My brother-in-law & I put the lift in a few weeks ago and had the tires installed & front end aligned last week.
The BB was very simple, just about 2 hrs to install. Lots covered on the forum on how to install a bb so I won't rehash. The kit came with 4 poly "pucks", front & rear bump stop extensions & all necessary hardware. Directions were sparce - like not telling you to disconnect the front drive shaft if you want the front axel to drop enough to get the springs & spacers in (the do tell you later in the directions to re-install driveshaft.
Tires are on factory 17" rims w/o wheel spacers. Used the steering-stop adjustment found on project-jk.com, worked perfect!
Here's the pics:
The BB was very simple, just about 2 hrs to install. Lots covered on the forum on how to install a bb so I won't rehash. The kit came with 4 poly "pucks", front & rear bump stop extensions & all necessary hardware. Directions were sparce - like not telling you to disconnect the front drive shaft if you want the front axel to drop enough to get the springs & spacers in (the do tell you later in the directions to re-install driveshaft.
Tires are on factory 17" rims w/o wheel spacers. Used the steering-stop adjustment found on project-jk.com, worked perfect!
Here's the pics:
Last edited by jim07x; Feb 17, 2008 at 10:20 PM. Reason: more pics!
