2016 JKUS Overland Project
Hello everyone, my name Tony and bought a 2016 JKUS earlier in the year and finally reached the point of modifying it. I went on a couple trail ride trips with my local off-road and Jeep clubs to see what the JK can do stock and was really surprised.
At any rate let’s get to brass tax. I am wanting a hybrid overland/rock crawling rig, as I want to hide in the middle of nowhere but also want to continue to do the crawling trips with my Jeep groups. I currently have Carbon chromoly rear axle shafts (bent mine in Hawk Pride ORV in Alabama), TeraFlex Overland Outback lift, Falcon 3.3 shocks, MT Classic 3 alloys (17x9), and 35” BFG KM2. Now I have done a ton of research and listened to a ton of friends and group members on everything I purchased, but the knowledge depletes as I get into what I want to do with my Dana 30. Many members have done the UD60 swaps, but I have the overlanding plan in my head and want to keep weight down which got me looking at the Tera44 with the full float conversion. That is why I am posting this thread. Can anyone give me any advice or drop some knowledge on me for the Tera44 with a full float conversion? I may be beating a dead horse on this subject but I couldn’t find anything in the search results. BTW I am thick skinned and do well with blunt responses so don’t hold back. Oh and Thanks in advance. |
It's not that the TF44 with the full float conversion couldn't fit your needs, but dang.....the cost would never add up in my mind. Blowing that kinda money has to be on a 60 IMO, regardless of weight.
|
I don't have any experience with aftermarket assemblies other than drooling over them but I had the $$ I'd go with the Dana/Spicer Ultimate 44. Looks like they go for around 4k but complete with locker and your choice of gearing along with a list of other improvements. Honestly wouldn't worry about the weight, it probably wouldn't be much of an increase and besides, thats adding some beef where it counts!
|
Originally Posted by resharp001
(Post 4310869)
It's not that the TF44 with the full float conversion couldn't fit your needs, but dang.....the cost would never add up in my mind. Blowing that kinda money has to be on a 60 IMO, regardless of weight.
|
Originally Posted by lowendrider
(Post 4310871)
I don't have any experience with aftermarket assemblies other than drooling over them but I had the $$ I'd go with the Dana/Spicer Ultimate 44. Looks like they go for around 4k but complete with locker and your choice of gearing along with a list of other improvements. Honestly wouldn't worry about the weight, it probably wouldn't be much of an increase and besides, thats adding some beef where it counts!
Thanks sir. |
All times are GMT -8. The time now is 11:56 AM. |
© 2024 MH Sub I, LLC dba Internet Brands