4.56 or 4.88
 

I know this has been talked about frequently but I am looking at buying gears and am stuck between 4.56 or 4.88. My jeep is a 6 speed with a 3.21 gear ratio and its rolling on 33s. I will eventually be getting 35s but I would like to wear these tires out first so it could be up to a year or more before I make the upgrade. So from what I have gathered in my research and from the gear chart 4.88s are way overboard for 33s so would I be better off with 4.56s or would I be disappointed when I went to 35s?

go 4.88. the 4.56 seem to be real tough to get a hold of and the 4.88 with 35's are spot on.

stan at northridge will fix you up - better prices/service than anyone else

I just installed 4.88 with 35's and love it. go with the 4.88's.

Right now I have 4.88's and 33's, doing 70 mph my RPM's are right at 2400.

X2 on Northridge, they've got best prices I've seen so far on ring & pinions, and there customer service is great! :thumbsup:

With a six speed: 4.56s and 33s are perfect: I ran 4.10s and it was a bit weak. 4.88s and 35s are perfect: I'm currently running it and love it--would not want gearing any higher, or tires any smaller, though. You need to make up your mind which you want to be.

I have a 6 speed with 4.88s and 34 inch tires. I love the combo and wouldnt mind 5.13s if I had a dana 44. Ur crawl ratio will be awesome with 33s. If u wheel hard stuff at all I say go for the 4.88s. do you do a lot of highway driving?

I do a fair bit of highway driving. What drawbacks would I experience with 4.88s and 33s besides poor milage? Excess stress on drivetrain?

neither, 5:38 gears with 35/37's

33's IMO are too small for the body,, i think the wrangler is top heavy to begin with,, in my experience, the tires should be bigger to compensate

I agree I find the 33s look small. My plan is to try and run 35s with no lift and trim pinch seams.