Advice before I pull trigger?
Thanks again guys. I made a couple changes to my original plan.
I ordered the following:
-Rock krawler 3.5 mid flex system
-Bilstien 5100 shocks
-17x9 Procomp 69 series aluminum wheels
-35x12.5 MTR/K
-4.88 gears front and rear axle
-Eaton E locker front and rear axle
I ordered the following:
-Rock krawler 3.5 mid flex system
-Bilstien 5100 shocks
-17x9 Procomp 69 series aluminum wheels
-35x12.5 MTR/K
-4.88 gears front and rear axle
-Eaton E locker front and rear axle

rock
Looks like a good build.
One word of warning. If you are ordereing RK parts/Lifts and they are shipping it from RK they take forever to even give it to UPS! 10 days and counting for some control arms they claim to have in stock!!
One word of warning. If you are ordereing RK parts/Lifts and they are shipping it from RK they take forever to even give it to UPS! 10 days and counting for some control arms they claim to have in stock!!
Also had them throw in a synergy inner axle sleeve kit and a synergy c gusset kit, and a set of aftermarket diff covers! Can't wait to get all this stuff!!! I hope it doesn't take too long to come in.
Nice set up! I went rk 2.5 max travel and that took three weeks. I also ordered the rrd shocks and itsbeen over a month for those. *
Also ordered the eaton e locker which I made sure was the 4 pinion design for the rear and a lsd true trac for the front. 4.88 gears go inthis weekend
Also ordered the eaton e locker which I made sure was the 4 pinion design for the rear and a lsd true trac for the front. 4.88 gears go inthis weekend


