dbmorris

I am ready to pull the trigger on a set of Borah wheels but being there are none local I am trying to find pictures of the various color combinations while mounted on a Jeep. Any here you could share?

ANGLICOjeep

I like the Satin Borah's but they only make those for the JL. They have different backsets and i was wondering if I could install them on my JK? I will run 37's on a 2.5" lift.

Also considered the spend brass but I would like to see a photo of them on a Gobi Tan Jeep - photos if anyone has them!

karls10jk

You might have better luck finding pics of these wheels on AEV's forum, they've got a decent following there that will have all of the info you'd like and the engineers occasionally chime in as well.

resharp001

You're really going to want 3.5" BS to run 37s. I don't know what BS those wheels have, but I'd bet dollars to donuts it's not 3.5".

scubatech

My friends Pintler's were around 5.5" if I remember right. They have as close to stock back space as possible for drive ability.

karls10jk

Pintlers came in two different backspacing options, neither were good for larger tires. I run them plus a wheel spacer.

jadmt

I ran Pintlers, Savgres and Saltas with 35x12.5-17 and never had an issue. I know a lot of guys run them with 37's. They are 5.2" BS the Boras are 4.9. The orginal pintler bead locks were 4.5".

ANGLICOjeep

Borahs for the JK have a 4.9" backset

Borahs for the JL have a 5.72" backset

I want to run the JL's on my JK because of the color option.

ANGLICOjeep

Borahs for the JK have a 4.9" backset

Borahs for the JL have a 5.72" backset

I want to run the JL's on my JK because of the color option.

jadmt

definitely going to need spacers then.