Notices
Modified JK Tech Tech related bulletin board forum regarding subjects such as suspension, tires & wheels, steering, bumpers, skid plates, drive train, cages, on-board air and other useful modifications that will help improve the performance and protection of your Jeep JK Wrangler (Rubicon, Sahara, Unlimited and X) on the trail.

PLEASE DO NOT START SHOW & TELL TYPE THREADS IN THIS FORUM
Sponsored by:
Sponsored by:

Any 3"/5.13s/35s/dbl cardon shafts and NO vibes?

Thread Tools
 
Old 08-18-2008, 06:26 AM
  #1  
JK Enthusiast
Thread Starter
 
greggradwohl's Avatar
 
Join Date: Mar 2007
Posts: 427
Likes: 0
Received 0 Likes on 0 Posts
Default Any 3"/5.13s/35s/dbl cardon shafts and NO vibes?

I started with significant vibrations around 50. After some rear uppers and better shafts , I now have a slight vibe over 65 (slight meaning a little less vibe than produced by the engine - similar frequency). It seems to stay about the same up to 80 (as fast as I go in this). Is this just the way it is with my setup?


4 door rubi
2.5" OME
FT adjustable rear uppers
superior 5.13s
Custom 1310 shafts
35 12.5 Dick Ceepek FC2s



Quick Reply: Any 3"/5.13s/35s/dbl cardon shafts and NO vibes?



All times are GMT -8. The time now is 03:24 AM.