Thanks for doing the Jeep thing. It's great to see folks from all over pulling together on stuff.

BTW, isn't $35 aus about $2.27 US?:rotflmao1:

Nope it's currently $27.53 and getting better :2thumbs:

(Hmmm, it's been about 20 - 25 years since the Au dollar was stronger than the US dollar :eek2: , will it happen again?)

Tag/third brakelight relocation for under $20...

http://my.project-jk.com/data/500/medium/100_0937.JPG
http://my.project-jk.com/data/500/100_09351.jpg
http://my.project-jk.com/data/500/100_09361.jpg
http://my.project-jk.com/data/500/100_09381.jpg

Niiice!:2thumbs: Did you modify the stock bracket, or is that an after market I have yet to see? If stock then where did you find the cool LED's? I feel a write up request coming on, unless you've done that already and somehow I missed it.

Again, very niiiice!:yup:

Thanks, I actually trimmed up the stock bracket and mounted it to some bar aluminum that I fabricated a bracket out of. That bracket runs through the center of the spare wheel and mounts to the tire carrier. That took care of the tag light. Then, I found an L.E.D. at Advance for $10 mounted it and re-ran the wiring in the loom that I had already ran for the tag light, easy. I could do a quick write up with some pics( I'll have to snag some more)

Cover
 

Thanks for the part number. :yup: I picked mine up today and relocated my license plate using Rock hard 4x4's mount and ORO's license plate LED lights.

Yeah baby!

I really, really wanted the license plate mount and that's what I modeled my own after, but in the end, I just couldn't fork out $40 for that ($80 for the mount/light assembly) for something I could make for next to nothing.