Australian JK Help
08-16-2007, 12:16 PM
#21
JK Junkie
Thread Starter
BTW, isn't $35 aus about $2.27 US?
08-16-2007, 05:45 PM
#22
JK Newbie
Join Date: May 2007
Location: Gold Coast Australia
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
, will it happen again?)
08-19-2007, 07:52 AM
#24
JK Junkie
Thread Starter
Niiice!
Did you modify the stock bracket, or is that an after market I have yet to see? If stock then where did you find the cool LED's? I feel a write up request coming on, unless you've done that already and somehow I missed it.
Again, very niiiice!
Did you modify the stock bracket, or is that an after market I have yet to see? If stock then where did you find the cool LED's? I feel a write up request coming on, unless you've done that already and somehow I missed it.Again, very niiiice!
08-19-2007, 04:39 PM
#25
JK Junkie
Join Date: Feb 2007
Location: Central Georgia
Posts: 2,326
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, I actually trimmed up the stock bracket and mounted it to some bar aluminum that I fabricated a bracket out of. That bracket runs through the center of the spare wheel and mounts to the tire carrier. That took care of the tag light. Then, I found an L.E.D. at Advance for $10 mounted it and re-ran the wiring in the loom that I had already ran for the tag light, easy. I could do a quick write up with some pics( I'll have to snag some more)
Last edited by BLKRUBI; 08-23-2007 at 09:56 AM.
Cover
08-22-2007, 04:53 PM
#27
JK Junkie
Thread Starter
08-23-2007, 05:28 AM
#28
JK Junkie
Join Date: Feb 2007
Location: Central Georgia
Posts: 2,326
Likes: 0
Received 0 Likes
on
0 Posts
I really, really wanted the license plate mount and that's what I modeled my own after, but in the end, I just couldn't fork out $40 for that ($80 for the mount/light assembly) for something I could make for next to nothing.
Last edited by BLKRUBI; 08-23-2007 at 09:57 AM.