Back to Square 1
Thread Starter
JK Newbie
Joined: Mar 2009
Posts: 17
Likes: 0
From: Chugiak, Alaska
Been along time since ive posted back on these boards, but anyway Im back to square one with the jeep (09 Rubicon Unlimited 6sp Manual). About 6 months ago I purchased a 4.5" BDS lift/front and rear adj jks trackbars/ XD Hoss wheels/35" cooper stt's/driveshafts the whole nine and like a ritard i sold it all due to my second knee surgery on the same knee (left one) and i was all for selling the jeep cuzz it hurt when i pushed the clutch in. Anyway i decided not to sell it and now I'm undecided on all this stuff again. I want to eventually run 37's i know that... might run 35s first and see how it goes.
Once again Im looking at Teraflex/BDS/RE/RK/Clayton etc.
Just hard to decide. I want the most bang for my buck if you know what i mean. Anybody tried that RC 4" X series kit. Never ran a RC lift so i dont know how good there stuff is.
Anyway just thought i would share my dilemma once again...lol
Once again Im looking at Teraflex/BDS/RE/RK/Clayton etc.
Just hard to decide. I want the most bang for my buck if you know what i mean. Anybody tried that RC 4" X series kit. Never ran a RC lift so i dont know how good there stuff is.
Anyway just thought i would share my dilemma once again...lol
There are some threads from unsatisfied RC lift owners.
I suggest you start by reading them and determining if their complaints are of any concern to you.
I understand the attraction to budget oriented lifts like the RC and Superlift but depending on your driving habits and expectations they may not be an effective cost savings approach in the long run specially for lifts of 4"+.
Why are you changing your original choice of the BDS?
I suggest you start by reading them and determining if their complaints are of any concern to you.
I understand the attraction to budget oriented lifts like the RC and Superlift but depending on your driving habits and expectations they may not be an effective cost savings approach in the long run specially for lifts of 4"+.

Why are you changing your original choice of the BDS?


