Notices
Modified JK Tech Tech related bulletin board forum regarding subjects such as suspension, tires & wheels, steering, bumpers, skid plates, drive train, cages, on-board air and other useful modifications that will help improve the performance and protection of your Jeep JK Wrangler (Rubicon, Sahara, Unlimited and X) on the trail.

PLEASE DO NOT START SHOW & TELL TYPE THREADS IN THIS FORUM

Bestop or Mopar tailgate bar with new Supertop NX

Thread Tools
 
Old Mar 18, 2012 | 01:40 PM
  #1  
Indy_JK's Avatar
Thread Starter
JK Newbie
 
Joined: Sep 2011
Posts: 64
Likes: 0
From: Indianapolis
Default Bestop or Mopar tailgate bar with new Supertop NX

I am getting a Supertop NX for the warmer weather, so I have been doing some reading up on them. Several people have posted complaints about the Bestop rear tailgate bar - Leaves daylight showing at the ends, don't like the clips, etc. Some seem to have gone with an OEM Mopar bar and clips with their Supertop. So my question is, whats the real story? For those of you that have a new Supertop NX, how many don't like the rear bar, and how many of you have gotten an OEM bar to replace it?
Reply
Old Mar 18, 2012 | 03:00 PM
  #2  
mdslngr's Avatar
JK Enthusiast
 
Joined: Jan 2010
Posts: 179
Likes: 0
From: Not far from Ludington, Michigan
Default

I bought the NX last fall and ran it on my 07 for two weeks before the snow and cold came. Just put it on Friday

I am also looking into getting a stock tailgate bar. My mom has 2010 2dr with a softtop so I might borrow hers and test it
Reply
Old Mar 18, 2012 | 03:03 PM
  #3  
fadeout's Avatar
JK Junkie
 
Joined: May 2009
Posts: 3,093
Likes: 0
From: The Jersey Shore House
Default

Mines still sitting in the box but I went ahead and picked up a stock tailgate bar, its relatively cheap and from every post I've read it fits a lot better than what comes with the top.
Reply
Old Mar 18, 2012 | 03:54 PM
  #4  
chopperbobby's Avatar
JK Newbie
 
Joined: Aug 2010
Posts: 84
Likes: 0
From: northern kentucky
Default

Put mine on last weekend. Does leave gap and rain got in. I don't know if the oem bar is better or not. Seems most like the OEM bar better. It is anywhere from 70 to 100 dollars. I am going to try an make it work.
Reply
Old Mar 19, 2012 | 05:59 PM
  #5  
Indy_JK's Avatar
Thread Starter
JK Newbie
 
Joined: Sep 2011
Posts: 64
Likes: 0
From: Indianapolis
Default

Thanks for the replies. Looks like I may be getting an OEM tailgate bar.
Reply
Old Mar 19, 2012 | 06:04 PM
  #6  
coastguardjeeper's Avatar
JK Newbie
 
Joined: Sep 2011
Posts: 33
Likes: 0
From: Pasadena, MD
Default

Definitely an mopar tailgate bar. It is a lot easier to get on and off and seals perfectly to the tailgate.
Reply
Old Mar 19, 2012 | 06:17 PM
  #7  
SH0RTBUS's Avatar
JK Freak
 
Joined: Aug 2007
Posts: 585
Likes: 0
From: Denton, TX
Default

I vote Bestop bar. I could not get the rear flaps under the lip of the brackets without the tailgate bar brackets popping off. The Bestop bar worked perfectly.
Reply

Trending Topics

Old Mar 23, 2012 | 03:21 AM
  #8  
cyberil's Avatar
JK Enthusiast
 
Joined: Aug 2011
Posts: 193
Likes: 0
From: Herts. UK
Default

I've just ordered the Mopar, the Bestop is a bitch...
Reply
Old Mar 28, 2012 | 04:11 PM
  #9  
chemdoc93's Avatar
JK Newbie
 
Joined: Jan 2011
Posts: 33
Likes: 0
From: Michigan
Default

Did you order from dealer? What price did u get
Reply
Old Mar 28, 2012 | 10:13 PM
  #10  
silversurfer575's Avatar
JK Enthusiast
 
Joined: Nov 2011
Posts: 337
Likes: 1
From: Apex, NC
Default

I used the bestop bar for a few weeks. I switched to the mopar one. Seals the gap and is easier to go on and off, as everyone is reporting. Actually easier to tuck the flaps as well. I could not tuck both flaps with the bestop one.
Reply



All times are GMT -8. The time now is 07:34 PM.