Black Limb Risers for the JK
JK Enthusiast
Joined: Dec 2007
Posts: 112
Likes: 0
From: Southern Arizona
THEY LOOK NICE! I've been looking for a good set of limb risers myself. THANKS!
Thread Starter
JK Newbie
Joined: Aug 2012
Posts: 48
Likes: 0
From: Miami, Florida
It's like comparing an AEV bumper to a less expensive bumper, all about quality...
Just my $0.02
JK Super Freak
Joined: Jun 2011
Posts: 1,043
Likes: 0
From: chicago
I was originally going to do that, works out to $60 with the swage tool and it looks half assed. JK's arn't inexpensive vehicles so why put crap on them. I pulled the trigger on these last week and got them in 3 days. Haven't installed them yet, but every detail is perfect especially the black cable with sealed hardware looks sick. Definitely worth the $ for the complete kit.
It's like comparing an AEV bumper to a less expensive bumper, all about quality...
Just my $0.02
It's like comparing an AEV bumper to a less expensive bumper, all about quality...
Just my $0.02
JK Newbie
Joined: Aug 2012
Posts: 60
Likes: 0
From: Warren,mi
Originally Posted by JasonJK82
I was originally going to do that, works out to $60 with the swage tool and it looks half assed. JK's arn't inexpensive vehicles so why put crap on them. I pulled the trigger on these last week and got them in 3 days. Haven't installed them yet, but every detail is perfect especially the black cable with sealed hardware looks sick. Definitely worth the $ for the complete kit.
It's like comparing an AEV bumper to a less expensive bumper, all about quality...
Just my $0.02
JK Junkie
Joined: May 2009
Posts: 3,093
Likes: 0
From: The Jersey Shore House
A hundred and thirty bucks! That's jus nuts when I ran limb risers I made the brackets and the stuff from home depot with coated wire and stainless steel hardware still only cost me like $30 bucks for everything.
Thread Starter
JK Newbie
Joined: Aug 2012
Posts: 48
Likes: 0
From: Miami, Florida
*2 Stainless Turnbuckles $11
*Coated Cable (10') $10
*Thimbles & Stops $7
*4 Stainless D Rings $12
*Misc Stainless Screws/bolts/nuts: $6
*Swage Crimp Tool $30 < I didn't have one
*Rivet Gun $20 < I didn't have one
*Total $96
Once I realized how much of a pain in the ass bending and cutting steel is, decided to just buy the complete kit because it was gonna cost at least $130 anyways.
Last edited by JasonJK82; Sep 9, 2012 at 07:54 AM.
JK Junkie
Joined: May 2009
Posts: 3,093
Likes: 0
From: The Jersey Shore House
I was kicking around doing it my self with home depot parts:
*2 Stainless Turnbuckles $11
*Coated Cable (10') $10
*Thimbles & Stops $7
*4 Stainless D Rings $12
*Misc Stainless Screws/bolts/nuts: $6
*Swage Crimp Tool $30 < I didn't have one
*Rivet Gun $20 < I didn't have one
*Total $96
Once I realized how much of a pain in the ass bending and cutting steel is, decided to just buy the complete kit because it was gonna cost at least $130 anyways.
*2 Stainless Turnbuckles $11
*Coated Cable (10') $10
*Thimbles & Stops $7
*4 Stainless D Rings $12
*Misc Stainless Screws/bolts/nuts: $6
*Swage Crimp Tool $30 < I didn't have one
*Rivet Gun $20 < I didn't have one
*Total $96
Once I realized how much of a pain in the ass bending and cutting steel is, decided to just buy the complete kit because it was gonna cost at least $130 anyways.