I was trying to get the stock muffler of my 09 and can not get the hangers through the rubber grommets. I was under the truck for 3 hours yesterday trying to push them through. No luck. I used soapy water and still nothing. Anyone know how to get the stupid hanger out. Thx

 

A rubber mallet might help!

 

You can pick up some exhaust hanger removal pliers or just beat on it. Check you local auto parts store.

 

Channel locks work

 

I used neversieze just for the slickness and a big pair of channel locks and pinched it together till they popped through and did the same to get the new ones on took about 2 min for each hanger

 

I tried channel locks and nothing. They are not that big but still was a pain and got no where

 

Yep, real pain, i used Silicone based lubricant,
Superlube and finally got mine out. Definitely was more of a hassle than i was expecting

 

Yep soak some WD40 on there and they'll slide right off. Have to put some muscle into. Lol try ky!!

 

As for the hanger removed pliers no auto part store around here has it. This would a lot easier if I had a lift. Layin under the jeep is killing me

 

They can be a PITA.
As has been stated soak them with WD40, PB Blaster or the like.
You can use a pry/crow bar as well for leverage as well.
Good luck!