Caster: I want the truth !!!
JK Junkie
Joined: Oct 2006
Posts: 2,466
Likes: 0
From: Pottstown, PA
OK... Trying to learn as much as I can about caster reading these threads and get mine set to the optimal angle.
My setup is 2.5" TF coil lift + 3/4" front spacers on 33" tires. My alignment numbers are below and based on what I've read I would benefit from adjustable lower front control arms and 5-6 degrees caster...sound about right? Please advise
My setup is 2.5" TF coil lift + 3/4" front spacers on 33" tires. My alignment numbers are below and based on what I've read I would benefit from adjustable lower front control arms and 5-6 degrees caster...sound about right? Please advise
I have an angle finder so it sounds like I'll be able to see the relative difference in the caster angle using before/after angle measurements and according to the printout above from my last alignment I'm currently at 2.7°/2.9°.
Any feedback would be appreciated !
JK Jedi Master
Joined: Oct 2006
Posts: 15,133
Likes: 0
From: O HI 4 Lo
but who wants to get out and lock the hubs in all the time. 
I have the caster just over 7 degree's. It handles great
