Notices
Modified JK Tech Tech related bulletin board forum regarding subjects such as suspension, tires & wheels, steering, bumpers, skid plates, drive train, cages, on-board air and other useful modifications that will help improve the performance and protection of your Jeep JK Wrangler (Rubicon, Sahara, Unlimited and X) on the trail.

PLEASE DO NOT START SHOW & TELL TYPE THREADS IN THIS FORUM

Comparison

Thread Tools
 
Old May 2, 2012 | 06:45 PM
  #1  
tapp's Avatar
Thread Starter
JK Freak
 
Joined: Sep 2011
Posts: 682
Likes: 0
From: springfield, mo
Default Comparison

Was wanting to run 35s on a two door. And I am torn between a 3in or 4in lift. Any pics comparing them?
Reply
Old May 2, 2012 | 06:49 PM
  #2  
wayoflife's Avatar
JK-Forum Founder
 
Joined: Jul 2006
Posts: 36,534
Likes: 16
From: Laguna Niguel, CA
Default

honestly, 3" is all you really need and in my opinion, all you should really want. at 4" of lift, you really need to spend a lot more money to get your jeep dialed in right and, your COG will be way off.
Reply
Old May 2, 2012 | 06:51 PM
  #3  
bbrown626's Avatar
JK Freak
 
Joined: Jun 2011
Posts: 723
Likes: 2
From: Murrieta, CA
Default

Originally Posted by tapp
Was wanting to run 35s on a two door. And I am torn between a 3in or 4in lift. Any pics comparing them?
No comparison available, but I installed a TF 3" lift and realized 4" of lift before any mods.
Just installed the LOD front bumper and Warn M8000 winch and lost 1/2". Still more than enough room left for the 35's if i can decide on a set of wheels.
Reply
Old May 2, 2012 | 09:04 PM
  #4  
tapp's Avatar
Thread Starter
JK Freak
 
Joined: Sep 2011
Posts: 682
Likes: 0
From: springfield, mo
Default

Originally Posted by wayoflife
honestly, 3" is all you really need and in my opinion, all you should really want. at 4" of lift, you really need to spend a lot more money to get your jeep dialed in right and, your COG will be way off.
On a 3" lift what all extra am I looking at doing to the jk. Looking at the FT Eco lift.
Reply




All times are GMT -8. The time now is 12:07 PM.