DIY -- brakeline extenders
JK Super Freak
Joined: Oct 2007
Posts: 1,595
Likes: 0
From: The Badlands (near Lafayette, IN)
I only extended the rear. The fronts didn't seem near as tight at flex.
I used a piece of stainless mending plate from Menards. (with stainless button head screw and lock washer)
The tab on the brakeline bracket used to be in the slot.
I used the bottom of the frame rail as the alignment location for the relocated tab.
I used a piece of stainless mending plate from Menards. (with stainless button head screw and lock washer)
The tab on the brakeline bracket used to be in the slot.
I used the bottom of the frame rail as the alignment location for the relocated tab.
